Re: [PATCH] thunderbolt: Enable runtime PM for the Ice Lake router with the software CM
From: Mika Westerberg
Date: Wed Nov 11 2026 - 08:24:51 EST
Hi,
On Wed, Nov 11, 2026 at 02:08:51PM +0100, Andre Eikmeyer wrote:
> The firmware connection manager reports RTD3 for the Ice Lake router.
> On Apple systems the software connection manager takes over and enables
> runtime PM only for USB4 routers, so the Ice Lake NHI stays in D0 for as
> long as the driver is bound and the package does not reach deep C-states.
>
> Enable runtime PM for the Ice Lake router as well. The Ice Lake NHI
> already has runtime suspend and resume callbacks.
>
> Tested on a MacBookAir9,1.
Cool, does it also wake up if you plug something to the TB ports?
>
> Signed-off-by: Andre Eikmeyer <dev@deq.rocks>
> ---
> drivers/thunderbolt/tb.c | 5 +++--
> drivers/thunderbolt/tb.h | 12 ++++++++++++
> 2 files changed, 15 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/thunderbolt/tb.c b/drivers/thunderbolt/tb.c
> index 418ad0a61a..139ef49b49 100644
> --- a/drivers/thunderbolt/tb.c
> +++ b/drivers/thunderbolt/tb.c
> @@ -3044,8 +3044,9 @@ static int tb_start(struct tb *tb, bool reset)
> * implement the necessary router operations.
> */
> tb->root_switch->no_nvm_upgrade = !tb_switch_is_usb4(tb->root_switch);
> - /* All USB4 routers support runtime PM */
> - tb->root_switch->rpm = tb_switch_is_usb4(tb->root_switch);
> + /* All USB4 routers support runtime PM. Ice Lake also supports RTD3 */
> + tb->root_switch->rpm = tb_switch_is_usb4(tb->root_switch) ||
> + tb_switch_is_ice_lake(tb->root_switch);
>
> ret = tb_switch_configure(tb->root_switch);
> if (ret) {
> diff --git a/drivers/thunderbolt/tb.h b/drivers/thunderbolt/tb.h
> index e86845762e..eff4a342d6 100644
> --- a/drivers/thunderbolt/tb.h
> +++ b/drivers/thunderbolt/tb.h
> @@ -1011,6 +1011,18 @@ static inline bool tb_switch_is_tiger_lake(const struct tb_switch *sw)
> return false;
> }
>
> +static inline bool tb_switch_is_ice_lake(const struct tb_switch *sw)
> +{
> + if (sw->config.vendor_id == PCI_VENDOR_ID_INTEL) {
> + switch (sw->config.device_id) {
> + case PCI_DEVICE_ID_INTEL_ICL_NHI0:
> + case PCI_DEVICE_ID_INTEL_ICL_NHI1:
> + return true;
> + }
> + }
> + return false;
> +}
> +
> /**
> * tb_switch_is_icm() - Is the switch handled by ICM firmware
> * @sw: Switch to check
>
> base-commit: 13527afe5f15c60b82920fe9915f3cabf1315302