Re: [PATCH v2 1/3] dt-bindings: display: panel: ilitek, ili9488: make the port optional

From: Icenowy Zheng

Date: Wed Nov 11 2026 - 10:40:38 EST


在 2026-11-10二的 13:48 +0100,Krzysztof Kozlowski写道:
> On 10/11/2026 13:00, Krzysztof Kozlowski wrote:
> > On Mon, Nov 09, 2026 at 05:07:04PM +0100, Romain TISSERAND wrote:
> > > The panel is a MIPI-DSI peripheral, a child node of its DSI host,
> > > and the
> > > driver does not use a graph port. A port is only needed when the
> > > host
> > > links its panel through the graph; other DSI hosts, such as the
> > > Allwinner
> > > sun6i-a31-mipi-dsi one, link the child node and have no output
> > > port to
> > > point at. The PinePhone panel is described that way on the same
> > > host,
> > > without a port.
> > >
> > > Keep the port allowed (panel-common) but no longer required, as
> > > for other
> > > DSI panels such as ilitek,ili9881c.
> >
> > ilitek,ili7807s and a few others have the same and it is confusing.
> > The
> > port should be required when this is connected over SPI or I2C, but
> > not
> > for MIPI DSI. I think that for MIPI DSI port is meaningless so
> > actually
> > incorrect.
> >
> > Why was it added in the first place?
> >
>
> However won't all DRM drivers actually require panel? see
> b089c0a9b14c
> and 169466d4e59c which removed fallback to the child node.

The sun6i-mipi-dsi driver just tries to acquire a panel with the MIPI
DSI downstream device OF node using of_drm_find_panel().

Well I start to doubt whether a bridge would work in this case now.

Thanks,
Icenowy

>
> Best regards,
> Krzysztof