Re: [PATCH] dt-bindings: display: panel: Make DSI panels port optional

From: Icenowy Zheng

Date: Wed Nov 11 2026 - 10:59:25 EST


在 2026-11-11三的 12:13 +0100,Maxime Ripard写道:
> On Wed, Nov 11, 2026 at 12:03:39PM +0100, Krzysztof Kozlowski wrote:
> > DSI panels can be placed under DSI bus directly and many Linux DRM
> > drivers will work fine with it: mipi_dsi_host_register() adds
> > device for
> > such panel and DRM driver does not use OF graph to configure lanes.
>
> That's not true. We do use the endpoints to configure the lanes
> through
> the data-lanes property. See drm_of_get_data_lanes*
>
> > The affected here Linux panel drivers do not use OF graph, either.
> >
> > Requiring graph port for such panels is tying the binding to one
> > specific implementation of Linux DRM drivers, e.g. Qualcomm DRM
> > which
> > requires the port.  The port is not needed for the hardware to
> > operate
> > and for some of the Linux drivers, so it should be optional.
> >
> > Suggested-by: Romain TISSERAND <romain.tisserand@xxxxxxxxx>
> > Signed-off-by: Krzysztof Kozlowski
> > <krzysztof.kozlowski@xxxxxxxxxxxxxxxx>
>
> DSI busses can handle multiple devices, and multiple data types. If
> we
> were to drop the port node, how does the upstream video device know
> which device it should send its video output to?

BTW I checked sun6i-mipi-dsi (which is the driver cared in the other
thread), and it assumes the first DSI device attached is the panel.

Maybe this is some kind of overfit, assuming a 1-to-1 connection?

(And I wonder if anyone attached a bridge instead of a panel to a sunXi
device.)

Thanks,
Icenowy

>
> Maxime