Re: [PATCH v4] drm/msm/dp: allow eDP sinks without DP_SINK_COUNT

From: Dmitry Baryshkov

Date: Wed Nov 11 2026 - 12:34:38 EST


On Mon, Oct 19, 2026 at 10:44:41AM +0530, Vivek Kumar wrote:
> Some eDP sinks, especially fixed-format eDP-to-HDMI bridge chips with
> no downstream AUX-capable panel behind them, do not report a non-zero
> DP_SINK_COUNT even though they participate normally in DPCD capability
> exchange and link training.
>
> Treating sink_count == 0 as a permanent disconnect is valid for external
> DisplayPort, but it breaks eDP probe/enable paths in
> msm_dp_display_prepare_link().
>
> Use drm_dp_read_sink_count_cap() in msm_dp_link_parse_sink_status_field()
> and set link->sink_count to 1 when the capability is not available.
>
> In dp_panel.c, msm_dp_panel_read_link_caps() still reads DP_SINK_COUNT
> for branch devices. That read is left unchanged here: the sink on the
> tested board reports DPCD 1.4 and does not advertise a downstream port,
> so that path is not taken.
>
> Signed-off-by: Vivek Kumar <vk092kumar@xxxxxxxxx>
> Assisted-by : LLM
> ---
> drivers/gpu/drm/msm/dp/dp_display.c | 6 ++++--
> drivers/gpu/drm/msm/dp/dp_link.c | 30 +++++++++++++++++++++--------
> drivers/gpu/drm/msm/dp/dp_link.h | 5 ++++-
> drivers/gpu/drm/msm/dp/dp_panel.c | 5 +++++
> drivers/gpu/drm/msm/dp/dp_panel.h | 1 +
> 5 files changed, 36 insertions(+), 11 deletions(-)


Vivek please check the issues that Sashiko pointed out.
--
With best wishes
Dmitry