[PATCH v2 0/7] ARM: dts: Add Apalis iMX6 overlays

[Leonardo Costa]

This series adds device tree overlays for the Apalis iMX6 SoM. The
overlays cover parallel and LVDS displays, audio configuration and
OV5640 CSI camera modules.

The series adds support for:

- Toradex Capacitive Touch Display 10.1" LVDS
- Toradex Capacitive and Resistive Touch 7" Parallel Displays
- NAU8822 Bridge Tied Load configuration on the Apalis Evaluation Board V1.2
- Toradex OV5640 CSI camera variants with 27 MHz and 24 MHz oscillators

The Makefile entries build the standalone overlays as DTBOs, and add
ready-to-use composed DTBs for selected carrier boards and accessory
combinations, for build-time coverage. Additionally, this series adds
ready-to-use DTBs with HDMI enabled, combining the carrier board device
trees with the common imx-hdmi.dtso.

This series depends on another patch series and should be applied after it:

    - https://lore.kernel.org/imx/20261110-colibri-imx6-overlays-v2-0-9776c186d953@xxxxxxxxxxx/T/#t

    Adds the HDMI overlay common to i.MX SoCs, imx-hdmi.dtso. This is
    necessary to add the HDMI-enabled ready-to-use DTBs, and for the
    patches to apply cleanly.

Changes in v2:
  - Don't add the imx6q-apalis-hdmi.dtso overlay, and instead rely on
    the recently proposed common imx-hdmi.dtso.
  - Include 'tdx' in the display panel overlay names, to make it clear that
    these are Toradex products. Add 'v1' in the Toradex Capacitive Touch
    Display 10.1" LVDS display overlay, to make the product version explicit.
  - Link to v1: https://lore.kernel.org/all/20261001155412.3177428-1-leoreis.costa@xxxxxxxxx/T/#u

Signed-off-by: Leonardo Costa <leonardo.costa@xxxxxxxxxxx>
---
Leonardo Costa (7):
      ARM: dts: imx6q-apalis: Add ready-to-use DTBs with HDMI enabled
      ARM: dts: imx6q-apalis-ixora: Add 3.3V_SW power regulator
      ARM: dts: imx6q-apalis: Add Toradex Capacitive Touch Display 10.1" LVDS
      ARM: dts: imx6q-apalis: Add Toradex Capacitive Touch Display 7" Parallel
      ARM: dts: imx6q-apalis: Add Toradex Resistive Touch Display 7" Parallel
      ARM: dts: imx6q-apalis: Add NAU8822 Bridge Tied Load
      ARM: dts: imx6q-apalis: Add Toradex OV5640 CSI Cameras

 arch/arm/boot/dts/nxp/imx/Makefile                 | 86 ++++++++++++++++++++++
 .../imx/imx6q-apalis-eval-v1.2-nau8822-btl.dtso    | 15 ++++
 .../boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts   |  7 ++
 arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora.dts   |  7 ++
 .../dts/nxp/imx/imx6q-apalis-ov5640-24mhz.dtso     | 17 +++++
 arch/arm/boot/dts/nxp/imx/imx6q-apalis-ov5640.dtsi | 68 +++++++++++++++++
 arch/arm/boot/dts/nxp/imx/imx6q-apalis-ov5640.dtso | 18 +++++
 ...-apalis-tdx-panel-cap-touch-10inch-lvds-v1.dtso | 53 +++++++++++++
 ...-apalis-tdx-panel-cap-touch-7inch-parallel.dtso | 34 +++++++++
 ...-apalis-tdx-panel-res-touch-7inch-parallel.dtso | 30 ++++++++
 arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi      | 86 ----------------------
 11 files changed, 335 insertions(+), 86 deletions(-)
---
base-commit: c260ba495ecd8dc5639be9a45a70cb56391078a6
change-id: 20261103-b4-v2-apalis-imx6-overlays-e64cfa196df1

Best regards,
-- 
Leonardo Costa <leonardo.costa@xxxxxxxxxxx>