[PATCH 0/2] platform/x86: hp-wmi: HP OmniBook Ultra 14-kd0xxx (8EB4) fixes

[Samuel Wheeler via B4 Relay]

Two small hp-wmi changes for the HP OmniBook Ultra Laptop 14-kd0xxx
(board 8EB4, BIOS F.06, Panther Lake):

1. The thermal profile query returns status flags in its upper bytes,
   so reading the platform profile always fails with -EINVAL. Use only
   the low byte.
2. The laptop has the same battery charge mode interface as the
   Spectre 8C15/8C17. Add it to the charge_behaviour quirk list.

Both were tested on the laptop with the same code changes applied to the
hp-wmi of a 7.2.15-based distribution kernel. The patches themselves are
against pdx86 for-next and build there with W=1 without warnings;
checkpatch --strict is clean.

Patch 2 touches the same quirk table as the pending "platform/x86:
hp-wmi: Add OmniBook 7 14-fr0xxx to charge_behaviour quirks"
(https://lore.kernel.org/r/20261102155409.3061761-1-taranarmo@xxxxxxxxx),
so whichever is applied second will need a trivial rebase.

The ACPI analysis, the changes and these descriptions were prepared with
an AI coding assistant (Claude, by Anthropic), as described in each
patch. I reviewed them and ran the tests myself.

---
Samuel Wheeler (2):
      platform/x86: hp-wmi: Only use the low byte of the thermal profile
      platform/x86: hp-wmi: Add charge_behaviour quirk for OmniBook Ultra 14

 drivers/platform/x86/hp/hp-wmi.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)
---
base-commit: a514d723595bd8e5ce926a7fea148ceb3c26915c
change-id: 20261111-omnibook-8eb4-78891e074a1f

Best regards,
--  
Samuel Wheeler <swheel33@xxxxxxxxx>