[PATCH v9 02/11] arm64: dts: qcom: ipq5210: Introduce RDP504 common DT file
From: Varadarajan Narayanan
Date: Wed Nov 11 2026 - 23:42:10 EST
RDP504 has USB, PCIe and SPI NAND devices populated. EMMC and NAND
share the GPIOs. The board has to be reworked to change from EMMC
to NAND variant. Rename ipq5210-rdp504.dts as ipq5210-rdp504-common.dtsi
and include it in variant specific DTS file.
Describe the fixed USB regulators, PCIe reset GPIOs, QPIC SPI NAND flash
and required pinctrl states. Enable QPIC BAM, USB and PCIe for the board.
Signed-off-by: Varadarajan Narayanan <varadarajan.narayanan@xxxxxxxxxxxxxxxx>
---
.../arm64/boot/dts/qcom/ipq5210-rdp504-common.dtsi | 225 +++++++++++++++++++++
arch/arm64/boot/dts/qcom/ipq5210-rdp504.dts | 79 +-------
2 files changed, 227 insertions(+), 77 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq5210-rdp504-common.dtsi b/arch/arm64/boot/dts/qcom/ipq5210-rdp504-common.dtsi
new file mode 100644
index 000000000000..6fb8666ffbfd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5210-rdp504-common.dtsi
@@ -0,0 +1,225 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "ipq5210.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0";
+ };
+
+ vreg_misc_3p3: regulator-usb-3p3 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-name = "usb_hs_vdda_3p3";
+ };
+
+ vreg_misc_1p8: regulator-usb-1p8 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-name = "vdda_1p8_usb";
+ };
+
+ vreg_misc_0p925: regulator-usb-0p925 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <925000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-name = "vdd_core_usb";
+ };
+};
+
+&pcie0 {
+ pinctrl-0 = <&pcie0_default_state>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie0_phy {
+ status = "okay";
+};
+
+&pcie0_port0 {
+ reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
+};
+
+&pcie1 {
+ pinctrl-0 = <&pcie1_default_state>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie1_phy {
+ status = "okay";
+};
+
+&pcie1_port0 {
+ reset-gpios = <&tlmm 29 GPIO_ACTIVE_LOW>;
+};
+
+&qpic_nand {
+ pinctrl-0 = <&qpic_snand_default_state>;
+ pinctrl-names = "default";
+
+ flash@0 {
+ compatible = "spi-nand";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ nand-ecc-engine = <&qpic_nand>;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ };
+};
+
+&qusb_phy_0 {
+ vdd-supply = <&vreg_misc_0p925>;
+ vdda-pll-supply = <&vreg_misc_1p8>;
+ vdda-phy-dpdm-supply = <&vreg_misc_3p3>;
+
+ status = "okay";
+};
+
+/*
+ * The bootstrap pins for the board select the XO clock frequency that
+ * supports 48 MHz, 96 MHz or 192 MHz. This setting automatically
+ * enables the right dividers, to ensure the reference clock output
+ * from WiFi to the CMN PLL is 48 MHz.
+ */
+&ref_48mhz_clk {
+ clock-div = <1>;
+ clock-mult = <1>;
+};
+
+&sdhc {
+ max-frequency = <192000000>;
+ bus-width = <4>;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ pinctrl-0 = <&sdhc_default_state>;
+ pinctrl-names = "default";
+};
+
+&sleep_clk {
+ clock-frequency = <32000>;
+};
+
+&ssphy_0 {
+ vdda-pll-supply = <&vreg_misc_1p8>;
+ vdda-phy-supply = <&vreg_misc_0p925>;
+
+ status = "okay";
+};
+
+&tlmm {
+ pcie1_default_state: pcie1-default-state {
+ pins = "gpio29";
+ function = "gpio";
+ drive-strength = <6>;
+ bias-pull-down;
+ };
+
+ pcie0_default_state: pcie0-default-state {
+ pins = "gpio32";
+ function = "gpio";
+ drive-strength = <6>;
+ bias-pull-down;
+ };
+
+ qpic_snand_default_state: qpic-snand-default-state {
+ data-pins {
+ pins = "gpio0", "gpio1", "gpio2", "gpio3";
+ function = "qspi_data";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ cs-pins {
+ pins = "gpio4";
+ function = "qspi_cs_n";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ clock-pins {
+ pins = "gpio5";
+ function = "qspi_clk";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ qup_uart1_default_state: qup-uart1-default-state {
+ pins = "gpio38", "gpio39";
+ function = "qup_se1";
+ drive-strength = <6>;
+ bias-pull-down;
+ };
+
+ sdhc_default_state: sdhc-default-state {
+ data-pins {
+ pins = "gpio0", "gpio1", "gpio2", "gpio3";
+ function = "sdc_data";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ cmd-pins {
+ pins = "gpio4";
+ function = "sdc_cmd";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ clk-pins {
+ pins = "gpio5";
+ function = "sdc_clk";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+};
+
+&uart1 {
+ pinctrl-0 = <&qup_uart1_default_state>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&usb3 {
+ dr_mode = "host";
+
+ status = "okay";
+};
+
+/*
+ * The frequency of xo_board is fixed to 24 MHz, which is routed
+ * from WiFi output clock 48 MHz divided by 2.
+ */
+&xo_board {
+ clock-div = <2>;
+ clock-mult = <1>;
+};
+
+&xo_clk {
+ clock-frequency = <48000000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq5210-rdp504.dts b/arch/arm64/boot/dts/qcom/ipq5210-rdp504.dts
index 519307c6b61e..43cdb981a4ba 100644
--- a/arch/arm64/boot/dts/qcom/ipq5210-rdp504.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5210-rdp504.dts
@@ -5,30 +5,11 @@
/dts-v1/;
-#include "ipq5210.dtsi"
+#include "ipq5210-rdp504-common.dtsi"
/ {
- model = "Qualcomm Technologies, Inc. IPQ5210 RDP504";
+ model = "Qualcomm Technologies, Inc. IPQ5210 RDP504 (eMMC)";
compatible = "qcom,ipq5210-rdp504", "qcom,ipq5210";
-
- aliases {
- serial0 = &uart1;
- };
-
- chosen {
- stdout-path = "serial0";
- };
-};
-
-/*
- * The bootstrap pins for the board select the XO clock frequency that
- * supports 48 MHz, 96 MHz or 192 MHz. This setting automatically
- * enables the right dividers, to ensure the reference clock output
- * from WiFi to the CMN PLL is 48 MHz.
- */
-&ref_48mhz_clk {
- clock-div = <1>;
- clock-mult = <1>;
};
&sdhc {
@@ -41,59 +22,3 @@ &sdhc {
status = "okay";
};
-
-&sleep_clk {
- clock-frequency = <32000>;
-};
-
-&tlmm {
- qup_uart1_default_state: qup-uart1-default-state {
- pins = "gpio38", "gpio39";
- function = "qup_se1";
- drive-strength = <6>;
- bias-pull-down;
- };
-
- sdhc_default_state: sdhc-default-state {
- clk-pins {
- pins = "gpio5";
- function = "sdc_clk";
- drive-strength = <8>;
- bias-disable;
- };
-
- cmd-pins {
- pins = "gpio4";
- function = "sdc_cmd";
- drive-strength = <8>;
- bias-pull-up;
- };
-
- data-pins {
- pins = "gpio0", "gpio1", "gpio2", "gpio3";
- function = "sdc_data";
- drive-strength = <8>;
- bias-pull-up;
- };
- };
-};
-
-&uart1 {
- pinctrl-0 = <&qup_uart1_default_state>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-/*
- * The frequency of xo_board is fixed to 24 MHz, which is routed
- * from WiFi output clock 48 MHz divided by 2.
- */
-&xo_board {
- clock-div = <2>;
- clock-mult = <1>;
-};
-
-&xo_clk {
- clock-frequency = <48000000>;
-};
--
2.34.1