[PATCH v4 0/3] power: sequencing: qcom-wcn: support SW_CTRL wake IRQ

From: Linghui Wu

Date: Thu Nov 12 2026 - 02:28:56 EST


Some WCN3990-family devices use the SW_CTRL GPIO to indicate that
resources need to remain available while the application processor is
suspended.

Teach the Qualcomm WCN power-sequencing driver to use the existing
SW_CTRL GPIO as a dedicated wake IRQ when the power sequencer is marked
as a wakeup source. The PM core keeps the IRQ disabled during normal
operation and arms it for system suspend.

The series documents wakeup-source for the WCN PMU binding and enables
it for the Shikra CQM, CQS and IQS EVKs.

The series has been validated on linux-next on Shikra hardware.

Changes in v4:
- Rebase onto linux-next next-20261111.
- Revalidate the complete series against linux-next.

Changes in v3:
- Use the "dt-bindings: regulator:" prefix for the binding patch.
- Drop the RFC marker.
- Replace the "must" wording in the wake behavior description.
- Report runtime validation on qcom-next and kernel 6.18.y.

Changes in v2:
- Derive the wake IRQ from the existing SW_CTRL GPIO with gpiod_to_irq().
- Drop the separate interrupt description from the binding and DTS.
- Focus the description on the functional behavior.
- Rebase onto next-20261014.

Linghui Wu (3):
dt-bindings: regulator: qcom,wcn3990-pmu: document wakeup-source
power: sequencing: qcom-wcn: support SW_CTRL wake IRQ
arm64: dts: qcom: shikra: enable WCN SW_CTRL wakeup

.../bindings/regulator/qcom,wcn3990-pmu.yaml | 6 ++++
arch/arm64/boot/dts/qcom/shikra-cqm-som.dtsi | 1 +
arch/arm64/boot/dts/qcom/shikra-iqs-som.dtsi | 1 +
drivers/power/sequencing/pwrseq-qcom-wcn.c | 36 +++++++++++++++++++
4 files changed, 44 insertions(+)


base-commit: aaa2f954c21b205a0bcd0961e5b2be4e82e58455
--
2.43.0