[PATCH v2 1/2] dt-bindings: cache: l2c2x0: a disabled node is left to the firmware

From: Agustin Santiago Isasmendi

Date: Thu Nov 12 2026 - 02:55:12 EST


l2x0_of_init() is about to honour status = "disabled" on the L2 cache
node by leaving the controller alone. Say that the firmware must then
leave the cache disabled: the kernel does not check or change its state.

Assisted-by: LLM
Signed-off-by: Agustin Santiago Isasmendi <isasmendi.agus@xxxxxxxxx>
---
Documentation/devicetree/bindings/cache/l2c2x0.yaml | 3 +++
1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/cache/l2c2x0.yaml b/Documentation/devicetree/bindings/cache/l2c2x0.yaml
index ee604117ffb3..15b5d8c1ebdf 100644
--- a/Documentation/devicetree/bindings/cache/l2c2x0.yaml
+++ b/Documentation/devicetree/bindings/cache/l2c2x0.yaml
@@ -24,6 +24,9 @@ description: |+
early secure boot code. Thus no need to deal with their configuration
in the kernel at all.

+ Note 2: A node with status = "disabled" is not touched by the kernel at
+ all: the firmware must leave the cache disabled.
+
allOf:
- $ref: /schemas/cache-controller.yaml#

--
2.30.2