[PATCH v2 0/9] MIPS: Ingenic: Add XBurst / XBurst II infrastructure and improve overall Ingenic SoC support
From: H. Nikolaus Schaller
Date: Thu Nov 12 2026 - 03:27:55 EST
PATCH V2 2026-11-12 09:10:31:
The series updates the Ingenic platform support to allow clean transitions
between bootloader-provided Device Trees and built-in fallbacks. It provides
the foundational Kconfig, PRID, and CPU-probe blocks required for newer
Ingenic/Lumissil hardware generations (X1600, X2000, X2600) and adds JZ4730
for completeness.
Changes to V1
- allow user selection of BUILTIN_DTB (suggested by Paul Cercueil <paul@xxxxxxxxxxxxxxx>)
- added the CPU_XBURTS2 type here to solve an issue reported by kernel test robot
- removed PRID_IMP_XBURST2_R2 and merged into single commit
- reviewed all PRID_IMP with data sheets and programming manuals
- added full x2600 and jz4730 definition for completeness
- added platform makefile and load address for X1600, X2000, X2600
PATCH V1 2026-10-25 20:20:55:
The series updates the Ingenic platform support to allow clean transitions
between bootloader-provided Device Trees and built-in fallbacks. It provides
the foundational Kconfig, PRID, and CPU-probe blocks required for newer
Ingenic/Lumissil hardware generations (X1600, X2000, X2600).
The first patch corrects an inverted Kconfig condition regarding appended
and built-in DTBs. This fix is necessary to allow configurations where
the kernel relies entirely on a Device Tree provided dynamically by the
bootloader instead of forcing a built-in fallback.
The remaining patches implement CPU-probe initialization, correct PRID
mappings (including vendor-kernel values for the Ingenic A1 SoC),
platform load addresses, Kconfig updates, and generic board match updates.
Structure of the series:
1. MIPS: Ingenic: Fix inverted MIPS_NO_APPENDED_DTB logic in Kconfig
2. MIPS: Ingenic: Add and update PRIDs for XBurst II R0 and R2
3. MIPS: Ingenic: Expand Kconfig for X1600, X2000, and X2600 SoCs
4. MIPS: Ingenic: Add cpu-probe setup for XBurst and XBurst II R2
5. MIPS: generic: Add MACH_INGENIC type and compatible for X1600
6. MIPS: Ingenic: Add Platform makefile for X1600 and X2000
Testing:
The series has been compile-tested for generic Ingenic targets. PRID
values for jz4780, x1600, X2000, X2600 were verified on real hardware
(CI20, LX16, LX20 and LX26 boards respectively).
Please review and consider for inclusion.
H. Nikolaus Schaller (8):
MIPS: Kconfig: Allow user selection of BUILTIN_DTB with description
MIPS: Ingenic: Configure CONFIG_BUILTIN_DTB=y for Ingenic based
devices
MIPS: Ingenic: Do not force BUILTIN_DTB in Kconfig
MIPS: Ingenic: Update Ingenic XBurst implementation IDs
MIPS: generic: Add MACH_INGENIC type and compatible for X1600 and
X2600
MIPS: Ingenic: Expand Kconfig for X1600, X2000, and X2600 SoCs
MIPS: Ingenic: Expand Kconfig by MACH_JZ4730
MIPS: Ingenic: Add Platform makefile and load addresses for X1600,
X2000, X2600
周琰杰 (Zhou Yanjie) (1):
MIPS: Ingenic: Add a new CPU_XBURST2 type
arch/mips/Kconfig | 25 +++++++++++++--
arch/mips/configs/ci20_defconfig | 1 +
arch/mips/configs/cu1000-neo_defconfig | 1 +
arch/mips/configs/cu1830-neo_defconfig | 1 +
arch/mips/configs/gcw0_defconfig | 1 +
arch/mips/configs/qi_lb60_defconfig | 1 +
arch/mips/configs/rs90_defconfig | 1 +
arch/mips/generic/board-ingenic.c | 8 ++++-
arch/mips/include/asm/bootinfo.h | 2 ++
arch/mips/include/asm/cpu-type.h | 1 +
arch/mips/include/asm/cpu.h | 13 ++++----
arch/mips/ingenic/Kconfig | 43 ++++++++++++++++++++++++++
arch/mips/ingenic/Platform | 3 ++
arch/mips/kernel/cpu-probe.c | 7 +++++
14 files changed, 99 insertions(+), 9 deletions(-)
create mode 100644 arch/mips/ingenic/Platform
--
2.56.0