Re: [PATCH v18 0/7] usb: dwc3: introduce Rockchip glue driver

From: Chaoyi Chen

Date: Thu Nov 12 2026 - 04:00:32 EST


Hi Sebastian,

On 10/22/2026 2:05 AM, Sebastian Reichel wrote:
> The recent Rockchip platform have a combined PHY, which does USB3 and
> DisplayPort as well as muxing the lines in arbitrary order. Changing its
> enabled functionality requires a PHY reset and as the PHY provides a
> clock to the DWC3 controller, this can result in an SError. Apart from
> that the PHY might not start up correctly when the DWC3 PIPE interface
> is running. This series prepares a Rockchip specific DWC3 glue driver to
> help out with these problems. To become useful more patches are needed
> on the Rockchip USBDP PHY side, which are send separately.
>
> This was split from the USBDP cleanup series. v17 has a dependency on
> the patches that have been merged to phy's for-next branch. There are
> some additional Rockchip USBDP phy fixes, which depend on this series
> (which is effectively also a fix).
>

I'm not sure whether this is the right thing to do, but I tried applying
all the v18 patches on top of v14 patch1–patch27, and tested Type-C DP
on the RK3576 EVB1 board. And it seems to work fine.

Tested-by: Chaoyi Chen <chaoyi.chen@xxxxxxxxxxxxxx>

--
Best,
Chaoyi