[PATCH 0/4] Add Parade PS195 bridge support to enable HDMI on Glymur/Mahua/Kalambo CRDs

From: Nabige Aala

Date: Thu Nov 12 2026 - 05:18:21 EST


This series adds initial Linux support for the Parade PS195 DP-to-HDMI
bridge and uses it to enable HDMI on the Qualcomm Glymur CRD family
(Glymur CoB/SiP, Mahua, and Kalambo).

The PS195 operates autonomously using firmware loaded from external
SPI flash — it handles link training, EDID access, and hotplug detection
without host register intervention at runtime, so no existing bridge
driver fits its power-sequencing and reset model.

It introduces:

- a DT binding for PS195 (supplies, optional reset GPIO, and port graph),
- a DRM bridge driver that implements PS195 power sequencing and PM handling, and
- arm64 integration (defconfig + shared glymur-crd.dtsi wiring) so all three
variants can route DP over USB2 QMP combo PHY to HDMI through PS195.

Deps:
PHY PLL change: https://lore.kernel.org/all/20261028-glymur-phy-v3-v6-0-1f1d2e565a66@xxxxxxxxxxxxxxxx/
Glymur commonize change for regulator: https://lore.kernel.org/all/20261106-topic-sip_cob-v3-0-52cd3826ab49@xxxxxxxxxxxxxxxx/

Signed-off-by: Nabige Aala <nabige.aala@xxxxxxxxxxxxxxxx>
---
Mahadevan P (4):
dt-bindings: display: bridge: Add Parade PS195
drm/bridge: Add a driver for the Parade PS195
arm64: defconfig: Enable the Parade PS195 bridge
arm64: dts: qcom: glymur-crd: Enable HDMI output via PS195

.../bindings/display/bridge/parade,ps195.yaml | 98 ++++++++++
MAINTAINERS | 7 +
arch/arm64/boot/dts/qcom/glymur-crd.dtsi | 142 +++++++++++++++
arch/arm64/boot/dts/qcom/glymur.dtsi | 6 +
arch/arm64/configs/defconfig | 1 +
drivers/gpu/drm/bridge/Kconfig | 10 ++
drivers/gpu/drm/bridge/Makefile | 1 +
drivers/gpu/drm/bridge/parade-ps195.c | 197 +++++++++++++++++++++
8 files changed, 462 insertions(+)
---
base-commit: 944e974742c54a1d8236fe16897644c35ffd6433
change-id: 20261112-mahua-hdmi-8ee75b4fd29a

Best regards,
--
Nabige Aala <nabige.aala@xxxxxxxxxxxxxxxx>