[PATCH 1/4] dt-bindings: display: bridge: Add Parade PS195
From: Nabige Aala
Date: Thu Nov 12 2026 - 06:22:55 EST
From: Mahadevan P <mahadevan.p@xxxxxxxxxxxxxxxx>
Add bindings for the Parade PS195 DisplayPort to HDMI bridge, describing
its power supplies, optional reset GPIO and display ports.
Signed-off-by: Mahadevan P <mahadevan.p@xxxxxxxxxxxxxxxx>
Signed-off-by: Nabige Aala <nabige.aala@xxxxxxxxxxxxxxxx>
---
.../bindings/display/bridge/parade,ps195.yaml | 98 ++++++++++++++++++++++
MAINTAINERS | 6 ++
2 files changed, 104 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/bridge/parade,ps195.yaml b/Documentation/devicetree/bindings/display/bridge/parade,ps195.yaml
new file mode 100644
index 000000000000..089191570ef0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/parade,ps195.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/parade,ps195.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Parade PS195 DisplayPort to HDMI protocol converter
+
+maintainers:
+ - Mahadevan P <mahadevan.p@xxxxxxxxxxxxxxxx>
+
+description:
+ The PS195 converts DisplayPort input to HDMI output. Firmware loaded from
+ an external SPI flash handles link training, EDID access and hotplug
+ detection. This binding describes operation without host control of
+ the device registers. The optional I2C control port is not required for
+ display operation. Reset may be controlled by a GPIO or released by a
+ board resistor-capacitor network.
+
+properties:
+ compatible:
+ const: parade,ps195
+
+ vdd09-supply:
+ description: 0.95 V core and analog supply.
+
+ vdd12-supply:
+ description: 1.2 V I/O supply.
+
+ vdd33-supply:
+ description: 3.3 V supply.
+
+ reset-gpios:
+ maxItems: 1
+ description: GPIO connected to the active-low RESETB input.
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ unevaluatedProperties: false
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ unevaluatedProperties: false
+ description: DisplayPort input.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ unevaluatedProperties: false
+ description: HDMI output.
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - vdd09-supply
+ - vdd12-supply
+ - vdd33-supply
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ hdmi-bridge {
+ compatible = "parade,ps195";
+
+ vdd09-supply = <&vreg_hdmi_0p95>;
+ vdd12-supply = <&vreg_hdmi_1p2>;
+ vdd33-supply = <&vreg_hdmi_3p3>;
+
+ reset-gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ bridge_in: endpoint {
+ remote-endpoint = <&dp_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ bridge_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 46c416cadacd..9e1db88ec1c9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8581,6 +8581,12 @@ S: Maintained
F: Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml
F: drivers/gpu/drm/panel/panel-olimex-lcd-olinuxino.c
+DRM DRIVER FOR PARADE PS195 BRIDGE CHIP
+M: Mahadevan P <mahadevan.p@xxxxxxxxxxxxxxxx>
+L: dri-devel@xxxxxxxxxxxxxxxxxxxxx
+S: Maintained
+F: Documentation/devicetree/bindings/display/bridge/parade,ps195.yaml
+
DRM DRIVER FOR PARADE PS8640 BRIDGE CHIP
R: Douglas Anderson <dianders@xxxxxxxxxxxx>
F: Documentation/devicetree/bindings/display/bridge/ps8640.yaml
--
2.34.1