Re: [PATCH] ALSA: caiaq: Kill EP1 URB before unregistering the input device
From: Takashi Iwai
Date: Thu Nov 12 2026 - 08:03:37 EST
On Thu, 12 Nov 2026 10:48:54 +0100,
Sergei Nizovtsev wrote:
>
> snd_disconnect() unregisters the input device via
> snd_usb_caiaq_input_disconnect() and only afterwards kills the EP1
> command URB (cdev->ep1_in_urb). The EP1 completion handler
> usb_ep1_command_reply_dispatch() feeds snd_usb_caiaq_input_dispatch()
> for EP1_CMD_READ_{ERP,ANALOG,IO} replies, which report into
> cdev->input_dev. Since commit b04dcbb7f7b1 ("ALSA: caiaq: Use
> snd_card_free_when_closed() at disconnection") the input device is
> unregistered from snd_usb_caiaq_input_disconnect() but cdev->input_dev
> is cleared only later, in snd_usb_caiaq_input_free() from the card
> destructor. As the dispatch guard only tests cdev->input_dev for NULL,
> an EP1 reply that completes after input_unregister_device() but before
> cdev->ep1_in_urb is killed reports into an input device that has
> already been unregistered and, with no evdev client holding it open,
> freed.
>
> Normally the window is closed by the USB core: usb_unbind_interface()
> calls usb_disable_interface() before ->disconnect(), which flushes the
> EP1 URB as long as endpoint 0x81 belongs to the interface being
> unbound. But caiaq addresses EP1 through the device-wide pipe
> usb_rcvbulkpipe(usb_dev, 0x1) without checking which interface owns
> the endpoint. If a device declares it in another interface, the URB
> stays live across snd_disconnect() of the interface that owns the card.
>
> This needs a crafted device descriptor; a device that has EP1 in the
> interface caiaq is bound to is not affected.
>
> Kill cdev->ep1_in_urb (and the paired midi_out_urb) before the input
> and audio disconnect helpers, so no EP1 completion can run once the
> input device has been unregistered.
>
> Reproduced under KASAN with raw-gadget + dummy_hcd emulating an Audio
> Kontrol 1 (17cc:0815) with the EP1 bulk pair in interface 1: only
> interface 0 was bound to snd-usb-caiaq and then unbound through sysfs
> while the gadget flooded EP1 with EP1_CMD_READ_ERP replies. With no PCM
> stream running the window is very short and was only hit by stalling
> the unbinding CPU with a kgdb breakpoint at
> snd_usb_caiaq_audio_disconnect(). With the fix applied, the same test
> runs clean.
>
> BUG: KASAN: slab-use-after-free in input_event+0x3a/0xc0
> Read of size 8 at addr ffff8880151a4028 by task sh/118
>
> Call Trace:
> <IRQ>
> input_event+0x3a/0xc0
> snd_usb_caiaq_input_dispatch+0xab2/0xf00
> usb_ep1_command_reply_dispatch+0x1f3/0x580
> __usb_hcd_giveback_urb+0x246/0x400
> dummy_timer+0x1415/0x3380
> __hrtimer_run_queues+0x39d/0x800
> hrtimer_run_softirq+0x187/0x2d0
> handle_softirqs+0x1ff/0x930
> __irq_exit_rcu+0x15b/0x210
> irq_exit_rcu+0xe/0x20
> sysvec_apic_timer_interrupt+0x81/0xb0
> </IRQ>
> <TASK>
> asm_sysvec_apic_timer_interrupt+0x1a/0x20
> RIP: 0010:snd_usb_caiaq_audio_disconnect+0x0/0x70
> snd_disconnect+0x81/0x110
> usb_unbind_interface+0x1a0/0x860
> device_release_driver_internal+0x2c5/0x470
> unbind_store+0xde/0x100
> </TASK>
>
> Allocated by task 80:
> input_allocate_device+0x47/0x340
> snd_usb_caiaq_input_init+0x4c/0x1ac0
> snd_probe+0xab3/0x1160
> usb_probe_interface+0x2ea/0x810
>
> Freed by task 118:
> kfree+0x1ea/0x5c0
> input_dev_release+0xab/0xd0
> device_release+0xcf/0x250
> kobject_put+0x169/0x320
> snd_disconnect+0x79/0x110
> usb_unbind_interface+0x1a0/0x860
>
> Fixes: b04dcbb7f7b1 ("ALSA: caiaq: Use snd_card_free_when_closed() at disconnection")
> Cc: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Sergei Nizovtsev <snizovtsev@xxxxxxxxxxxxxx>
> Assisted-by: Claude:claude-opus-4-8
Applied now. Thanks.
Takashi