Re: [PATCH] soc: qcom: llcc-qcom: Reserve ISLAND1 ways on SM8750

[Vladyslav Tymoshchuk]

On Wed, Nov 11, 2026 at 03:21:13PM +0800, yzddMr6 wrote:
> With this table, system suspend can reset the SoC once nothing votes
> for the LPASS core. On a Xiaomi Pad 8 Pro with the LPASS_HW_MACRO_VOTE
> and LPASS_HW_DCODEC_VOTE votes released, 16 suspend attempts (15 with
> s2idle, one with PSCI system suspend) ended in a reset. The PMIC PON log
> shows only PS_HOLD-triggered resets and no PMIC fault.

I tried the patch on another SM8750 tablet, the OnePlus Pad 3, which has
what looks like the same symptom: the SoC resets about a minute after
s2idle entry, and the PMIC PON log shows a PS_HOLD warm reset followed
by a PS_HOLD hard reset.

It does not cure the reset here. The tree is v7.3-rc5 with out-of-tree
board support, without Ajay's series. Each run is one 60 s s2idle on
battery with the USB cable disconnected:

  this patch, Wi-Fi WoWLAN enabled                    reset
  this patch, Wi-Fi WoWLAN disabled                   reset
  this patch, rpmhpd domains left at their highest
    corner (rpmhpd sync_state callback removed)       reset
  no patch, MC0 kept voted in the sleep set           resumes

The last line is a local workaround in the interconnect driver that
keeps a minimal MC0 vote in the sleep bucket. It is the only thing that
avoids the reset on this tablet so far, and with it cxsd, aosd and ddr
in qcom_stats stay at 0. The first three runs are without it.

> Holding LPASS_HW_MACRO_VOTE or LPASS_HW_LPR_VOTE across suspend let one
> s2idle cycle each resume, but cxsd did not increase in either case.

On this tree the two votes do not seem to be dropped: with all five
macro codecs runtime suspended, clk_summary still shows LPASS_HW_MACRO
and LPASS_HW_DCODEC with a prepare count of 6 (LPASS_HW_LPR_VOTE is 0).
I read that on the workaround kernel while awake, not during suspend,
and the codecs have no system sleep callbacks here. So the resets above
most likely happened with both votes held, which is the state your
tablet resumes in.

> All of these suspend tests were done with a USB cable connected.

Does your tablet also resume with the cable disconnected? And does your
tree leave anything voted on MC0 in the sleep set?

I can run other variants here if that is useful.

Thanks,
Vladyslav