[RFC PATCH 1/3] dt-bindings: input: hid-over-spi: add the Surface Pro X touch digitizer

From: Tawheed Makhdoomi

Date: Thu Nov 12 2026 - 12:49:34 EST


The touch and pen digitizer of the Microsoft Surface Pro X (vendor 0x045e,
product 0x0996) is a HID over SPI device, but its firmware implements a
pre-release revision of the protocol (input header version 2, device
descriptor bcdVersion 0x0100) rather than HID over SPI 1.0, so the driver
cannot treat it as a "microsoft,g6-touch-digitizer".

Microsoft does not publish a part number or generation for this
digitizer, so name it after the product it ships in, like the
"microsoft,surface-sam" embedded controller.

Signed-off-by: Tawheed Makhdoomi <_@xxxxxxxxxx>
---
Documentation/devicetree/bindings/input/hid-over-spi.yaml | 1 +
1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/input/hid-over-spi.yaml b/Documentation/devicetree/bindings/input/hid-over-spi.yaml
index bed0746f0..beb7e0922 100644
--- a/Documentation/devicetree/bindings/input/hid-over-spi.yaml
+++ b/Documentation/devicetree/bindings/input/hid-over-spi.yaml
@@ -27,6 +27,7 @@ properties:
compatible:
enum:
- microsoft,g6-touch-digitizer
+ - microsoft,surface-pro-x-touch-digitizer

reg:
maxItems: 1
--
2.43.0