Re: [RFC PATCH] thunderbolt: Tunnel only the first DP OUT of Apple Studio Displays

From: Duff O'Melia

Date: Thu Nov 12 2026 - 18:03:14 EST


Hi Mika,

On Mon, Nov 09, 2026 at 11:30:39AM +0100, Mika Westerberg wrote:
> Can you provide full dmesg with thunderbolt.dyndbg=+p and drm.debug=0x10e
> in the kernel command line when you have everything connected and the issue
> reproduces?

Sure, it's attached, xz-compressed. It's from a reboot with everything
connected, on Omarchy's 7.2.15 kernel with its stock Thunderbolt driver
(my patch not applied). I added log_buf_len=64M so the start of the boot
isn't lost. I removed MAC addresses, USB serial numbers and some
firewall log lines, and changed nothing else.

In short:

- 0-3 is the 2026 model (0x8025). Both of its DP OUT adapters got
tunneled: 0:5 <-> 3:11 and 0:10 <-> 3:12.
- 1-1 is a 2022 model (0x801f) on the second host router. It got
0:6 <-> 1:10.
- 0-1 is the other 2022 model. It came up last, found no free DP IN
adapter ("no suitable DP IN adapter available, not tunneling") and
stays dark.
- In xe, DP-1 (DPTUN 0:1:5) is the 2026 model's first tile, DP-3
(DPTUN 0:1:10) its second tile, and DP-2 (DPTUN 1:1:6) the 2022
model. DP-1 and DP-2 run at 5120x2880.

One correction to my patch description: on this boot DP-3 isn't
disabled. Pipe D is active on it at 2560x2880 with no framebuffer on its
primary plane, and the compositor doesn't list it as a monitor. So the
second tile's stream does come up, but it shows nothing.

I'm happy to run anything else, such as the same boot with the patch
applied for comparison.

Thanks,
Duff

Attachment: dmesg-stock-driver-2026-11-12.txt.xz
Description: application/xz