[PATCH v2] platform/x86: bitland-mifs-wmi: Add Redmi G 2022 (TM2135) quirk
From: Yun Wang
Date: Thu Nov 12 2026 - 19:52:36 EST
The Redmi G 2022 (board TM2135, BIOS RMGAD6T0P1313) implements only
three modes: 0x02 for quiet, 0x01 for balanced and 0x03 for performance.
The default profile table maps balanced to 0x00, but this firmware
recognizes it as the performance mode. Because the firmware does not
implement the AC adapter type query, setting balanced-performance or
performance fails with -ENODATA.
Add a DMI entry with a three-entry profile table for this model and
enable skip_ac_type_check. 0x04 is not used for performance: writing it
succeeds and the value reads back as 0x04, but in three test runs on
7.2.11 the firmware did not emit WMI event 0x16, which it emits after
every other mode change. The Fn+K hotkey also cycles only through the
three modes above.
Tested on this machine with this patch and the series it depends on,
built as an out-of-tree module and loaded on a 7.2.14 kernel. Writing
low-power, balanced, and performance succeeds, the profile reads back
correctly, and the firmware emits one 0x16 event for each (values 2, 1,
and 3). Writing balanced-performance is rejected, and Fn+K cycles
through low-power, balanced, and performance.
Claude Code (claude-opus-5-5) analyzed the ACPI tables, wrote the test
scripts, specified the change and corrected this changelog. I wrote the
code and the changelog and ran the tests on this machine.
Link: https://lore.kernel.org/platform-driver-x86/OT2JfRLDi6yHShYvywRZoFBYdW-TUgdKqKtahRM5b0cZxNo6eGZHnO5dKf4oYFaEtZhEsqU-Q-2OFe0D-qToJMVUrS5_d2aa2Q5LD50ISIc=@proton.me/
Link: https://lore.kernel.org/all/BelDdF5woNEBX6dZ3_zJDEbVkifs1pdxEjtQ1yC-aKyZahijFJCllxm0l_SqZ5Hsj61D8wfJNa7uDSuNKmyyxo2S0tZp9QS5yaafeZUxvxE=@proton.me/
Suggested-by: Mingyou Chen <qby140326@xxxxxxxxx>
Tested-by: Yu Pan <neko205@xxxxxxx>
Signed-off-by: Yun Wang <7z0423arsenova@xxxxxxxxx>
---
Changes in v2:
- Rebased onto review-ilpo-next, which now has Mingyou Chen's merge
series (v16) and Chris Taraszka's Xiaomi Book Pro 14 series. The
TM2135 entries now follow the TM2424 ones; the added lines are the
same as in v1.
- Added Yu Pan's Tested-by.
- Retested with this patch on top of review-ilpo-next, built as an
out-of-tree module and loaded on a 7.4-rc2 based kernel: the results
are the same as described in the changelog.
v1: https://lore.kernel.org/all/20261106143114.95008-1-7z0423arsenova@xxxxxxxxx/
drivers/platform/x86/bitland-mifs-wmi.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/drivers/platform/x86/bitland-mifs-wmi.c b/drivers/platform/x86/bitland-mifs-wmi.c
index d834168381..3aac9d17ff 100644
--- a/drivers/platform/x86/bitland-mifs-wmi.c
+++ b/drivers/platform/x86/bitland-mifs-wmi.c
@@ -128,6 +128,18 @@ static const struct bitland_mifs_quirks tm2424_quirks = {
.skip_ac_type_check = true,
};
+static const struct bitland_profile_entry tm2135_profile_entries[] = {
+ { PLATFORM_PROFILE_LOW_POWER, 0x02 },
+ { PLATFORM_PROFILE_BALANCED, 0x01 },
+ { PLATFORM_PROFILE_PERFORMANCE, 0x03 },
+};
+
+static const struct bitland_mifs_quirks tm2135_quirks = {
+ .profile_entries = tm2135_profile_entries,
+ .num_profile_entries = ARRAY_SIZE(tm2135_profile_entries),
+ .skip_ac_type_check = true,
+};
+
static const struct dmi_system_id bitland_mifs_dmi_table[] = {
{
.matches = {
@@ -136,6 +148,13 @@ static const struct dmi_system_id bitland_mifs_dmi_table[] = {
},
.driver_data = (void *)&tm2424_quirks,
},
+ {
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "TIMI"),
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "TM2135"),
+ },
+ .driver_data = (void *)&tm2135_quirks,
+ },
{}
};
base-commit: 11b27ad8c8078e18b74d0d507180422bfafc962e
--
2.56.1