Re: [PATCH v2 0/2] ARM: l2c: honour status = "disabled" on the L2 cache node

From: Navid Ghahremani

Date: Thu Nov 12 2026 - 23:47:06 EST


Hi Agustin,

I tested v2 as posted on my ZTE ZXHN H3600 with 512 MiB and an L2C-310
r3p3, running 6.18.60 with the OpenWrt patches for this board and
booted with kexec.

With the cache node enabled the cache comes up as before. With the node
disabled the kernel reports that the L2C is disabled by the device tree
and leaves the cache off, and the board ran 10 minutes of Wi-Fi
receive, Ethernet send and PCIe config reads on both CPUs together
without a hang. Like in my earlier test, the previous kernel had already
turned the cache off before the kexec, so this does not show what the
boot loader leaves, but you checked that part on your unit.

Tested-by: Navid Ghahremani <ghahramani.navid@xxxxxxxxx>

Best regards,
Navid