Re: [PATCH] Input: goodix - sync the irq controller while starting firmware

[Dmitry Torokhov]

Hi Luca,

On Tue, Oct 20, 2026 at 02:26:48PM +0200, Luca Leonardo Scorcia wrote:
> On the Lenovo Tab E7 TB-7104F which has a Goodix GT-912F touch screen,
> the touch screen fails to come online after loading firmware, producing
> the error "Error reading 1 bytes from 0x8041: -6".
> 
> Comparing the upstream code with the Android stock sources a call to
> goodix_int_sync is required between the upload of the firmware and the
> watchdog restart. With this change the touchscreen is correctly detected
> and working.
> 
> Signed-off-by: Luca Leonardo Scorcia <l.scorcia@xxxxxxxxx>
> ---
> Relevant bit of the stock source driver at [1].
> 
> Credits for noticing the issue and finding its cause go to matemiller992
> on the postmarketOS forums, I cannot provide tags as he wants to stay
> anonymous.
> 
> [1] https://github.com/lscorcia/linux-lenovo-tb7104f/blob/2dad69c9f28611ac6d3db2f1ee11b480a60d83ee/kernel-4.4/drivers/input/touchscreen/mediatek/gt912_p98996/gt9xx_driver.c#L1529
> 
>  drivers/input/touchscreen/goodix_fwupload.c | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/input/touchscreen/goodix_fwupload.c b/drivers/input/touchscreen/goodix_fwupload.c
> index 5ae9a109ba0d..01e7705ef515 100644
> --- a/drivers/input/touchscreen/goodix_fwupload.c
> +++ b/drivers/input/touchscreen/goodix_fwupload.c
> @@ -155,6 +155,7 @@ static int goodix_enter_upload_mode(struct i2c_client *client)
>  
>  static int goodix_start_firmware(struct i2c_client *client)
>  {
> +	struct goodix_ts_data *ts = i2c_get_clientdata(client);
>  	int error;
>  	u8 val;
>  
> @@ -168,6 +169,10 @@ static int goodix_start_firmware(struct i2c_client *client)
>  	if (error)
>  		return error;
>  
> +	error = goodix_int_sync(ts);
> +	if (error)
> +		return error;
> +

There is call to goodix_int_sync() right after call to
goodix_start_firmware(). Is it still needed if we call it here? I think
the vendor drivers does not do it.

>  	error = goodix_i2c_read(client, GOODIX_REG_SW_WDT, &val, 1);
>  	if (error)
>  		return error;

Thanks.

-- 
Dmitry