[PATCH net-next 2/4] net: sparx5/lan969x: enable the switch core after clock setup
From: Daniel Machon
Date: Fri Nov 13 2026 - 08:52:57 EST
sparx5_init_switchcore() ends by setting HSCH_RESET_CFG.CORE_ENA, so the
switch core and queue system are already running when
sparx5_init_coreclock() configures the core clock afterwards. That is
fine for the dividers it sets on sparx5, but a later patch makes it also
program the lan969x core PLL, which should be done before the queue
system is enabled.
Move the CORE_ENA write to mchp_sparx5_probe(), right after
sparx5_init_coreclock(), so the core is enabled once its clock is set
up.
CORE_ENA also tells sparx5_init_switchcore() that the switch memories
are already initialized. The switch is only reset once, when the reset
controller probes, so after an unbind and bind CORE_ENA is still set
and the core clock is configured with the queue system running.
Signed-off-by: Daniel Machon <daniel.machon@xxxxxxxxxxxxx>
---
drivers/net/ethernet/microchip/sparx5/sparx5_main.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_main.c b/drivers/net/ethernet/microchip/sparx5/sparx5_main.c
index 68c80c63f9087..93a7cb89493c4 100644
--- a/drivers/net/ethernet/microchip/sparx5/sparx5_main.c
+++ b/drivers/net/ethernet/microchip/sparx5/sparx5_main.c
@@ -471,9 +471,6 @@ static int sparx5_init_switchcore(struct sparx5 *sparx5)
spx5_wr(ANA_AC_STAT_RESET_RESET_SET(1), sparx5, ANA_AC_STAT_RESET);
spx5_wr(ASM_STAT_CFG_STAT_CNT_CLR_SHOT_SET(1), sparx5, ASM_STAT_CFG);
- /* Enable switch-core and queue system */
- spx5_wr(HSCH_RESET_CFG_CORE_ENA_SET(1), sparx5, HSCH_RESET_CFG);
-
return 0;
}
@@ -928,6 +925,9 @@ static int mchp_sparx5_probe(struct platform_device *pdev)
goto cleanup_config;
}
+ /* Enable switch-core and queue system */
+ spx5_wr(HSCH_RESET_CFG_CORE_ENA_SET(1), sparx5, HSCH_RESET_CFG);
+
for (idx = 0; idx < sparx5->port_count; ++idx) {
config = &configs[idx];
if (!config->node)
--
2.34.1