Re: [PATCH v3 11/14 RESEND] arm64: dts: exynos8855: add cmu_top & cmu_peric clock DT nodes
From: Peter Griffin
Date: Fri Nov 13 2026 - 10:31:48 EST
On Fri, 13 Nov 2026 at 10:54, Raghav Sharma <raghav.s@xxxxxxxxxxx> wrote:
>
> Add required dt node for cmu_top & cmu_peric block.
> This also add sysreg_peric node. sysreg_peric contains
> DRCG and MEMCLK SFRs bits which are used in clock driver.
>
> Signed-off-by: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
> Signed-off-by: Raghav Sharma <raghav.s@xxxxxxxxxxx>
> ---
Reviewed-by: Peter Griffin <peter.griffin@xxxxxxxxxx>
> arch/arm64/boot/dts/exynos/exynos8855.dtsi | 32 ++++++++++++++++++++++
> 1 file changed, 32 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos8855.dtsi b/arch/arm64/boot/dts/exynos/exynos8855.dtsi
> index 0333b80eba84..2e5dc79d66bc 100644
> --- a/arch/arm64/boot/dts/exynos/exynos8855.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos8855.dtsi
> @@ -10,6 +10,7 @@
> */
>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/samsung,exynos8855.h>
>
> / {
> compatible = "samsung,exynos8855";
> @@ -170,12 +171,43 @@ pinctrl_cmgp: pinctrl@12030000 {
> interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> + cmu_top: clock-controller@13900000 {
> + compatible = "samsung,exynos8855-cmu-top";
> + reg = <0x13900000 0x10000>;
> + #clock-cells = <1>;
> + clocks = <&oscclk>;
> + clock-names = "oscclk";
> + };
> +
> pinctrl_usi: pinctrl@15030000 {
> compatible = "samsung,exynos8855-pinctrl";
> reg = <0x15030000 0x1000>;
> interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> + cmu_peric: clock-controller@15400000 {
> + compatible = "samsung,exynos8855-cmu-peric";
> + reg = <0x15400000 0x10000>;
> + #clock-cells = <1>;
> +
> + clocks = <&oscclk>,
> + <&cmu_top CLKCMU_DOUT_PERIC_NOC>,
> + <&cmu_top CLKCMU_DOUT_PERIC_MMC_CARD>,
> + <&cmu_top CLKCMU_DOUT_PERIC_IP>;
> + clock-names = "oscclk",
> + "bus",
> + "mmc_card",
> + "ip";
> + samsung,sysreg = <&sysreg_peric>;
> + };
> +
> + sysreg_peric: syscon@15420000 {
> + compatible = "samsung,exynos8855-peric-sysreg",
> + "syscon";
> + reg = <0x15420000 0x10000>;
> + clocks = <&cmu_peric CLK_GOUT_SYSREG_PERIC>;
> + };
> +
> pinctrl_peric: pinctrl@15440000 {
> compatible = "samsung,exynos8855-pinctrl";
> reg = <0x15440000 0x1000>;
> --
> 2.34.1
>