[PATCH 2/4] arm64: dts: qcom: sdm632-fairphone-fp3: Wire up PMI632 LCDB
From: Luca Weiss
Date: Fri Nov 13 2026 - 10:53:15 EST
Since Linux has gained LCDB support now, wire up the LCDB regulators so
we can turn them off and on as desired.
Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts | 26 ++++++++++++++---------
1 file changed, 16 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
index 3223884f9cd6..77331ae6a692 100644
--- a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
+++ b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
@@ -72,14 +72,6 @@ vreg_cam2_dig_1p2: regulator-cam2-dig-1p2 {
vin-supply = <&vph_pwr>;
};
- /* Dummy regulator until PMI632 has LCDB VSP/VSN support */
- lcdb_dummy: regulator-lcdb-dummy {
- compatible = "regulator-fixed";
- regulator-name = "lcdb_dummy";
- regulator-min-microvolt = <5500000>;
- regulator-max-microvolt = <5500000>;
- };
-
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
@@ -175,8 +167,8 @@ panel@0 {
reset-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
iovcc-supply = <&pm8953_l6>;
- vsn-supply = <&lcdb_dummy>;
- vsp-supply = <&lcdb_dummy>;
+ vsn-supply = <&pmi632_lcdb_ncp>;
+ vsp-supply = <&pmi632_lcdb_ldo>;
pinctrl-0 = <&mdss_te_default>;
pinctrl-names = "default";
@@ -212,6 +204,20 @@ &pm8953_resin {
status = "okay";
};
+&pmi632_lcdb {
+ status = "okay";
+};
+
+&pmi632_lcdb_ldo {
+ regulator-min-microvolt = <5500000>;
+ regulator-max-microvolt = <5500000>;
+};
+
+&pmi632_lcdb_ncp {
+ regulator-min-microvolt = <5500000>;
+ regulator-max-microvolt = <5500000>;
+};
+
&pmi632_lpg {
status = "okay";
--
2.56.1