Re: [PATCH v2 3/6] media: verisilicon: Don't offer VP8 above 1080p on the Rockchip VDPU2

From: Arun Iyengar

Date: Fri Nov 13 2026 - 11:04:07 EST


> Just to bring to your attention, the IP does support up to 65Kx65k, but then you
> can't do referencing (its the WebP mode, key frame only). Hughes Fruchet from ST
> started looking into this but his work was not completed. The general idea
> though was to perhaps introduce a V4L2_PIX_FMT_WEBP_VP8 (or VP8_INTRA, naming is
> hard) format to signal this to the decoder, and limit to 1080 the FMT_VP8 (what
> you are fixing I suppose).

Thanks, good to know. Yes, this only limits FMT_VP8, so a WebP or
VP8_INTRA format can still be added for the larger sizes.

> If you have time, it is also miss-configured on the imx8mm, the combo-core
> (G1/H1 combined, like RK modified version). While the imx8mq has 4k h264, I
> don't know if the VP8 core actually is capable of 4k, so perhaps both soc need
> fixing.

I have no i.MX8M board to check what the VP8 limit is there, so I left
those tables alone for now. I will take a look at getting a patch for
this separately.

Arun