Re: [PATCH v7 1/3] PCI: Cache bridge firmware secondary bus number

From: Lazar, Lijo

Date: Fri Nov 13 2026 - 12:04:13 EST




On 13-Nov-26 3:24 AM, Mario Limonciello wrote:
Drivers such as amdgpu and radeon need the bus number firmware assigned
to a device to match it against firmware tables like VFCT. The PCI core
may renumber buses (e.g. with pci=realloc), after which the runtime
number no longer reflects what firmware programmed.

Record the firmware secondary bus number on the bridge's struct pci_dev
the first time pci_read_bridge_windows() reads the bridge's bus numbers,
which happens before any renumbering. Devices behind the bridge can then
retrieve the original bus number via their upstream bridge.

Only store the value if it is usable: ignore unconfigured (0) and 0xff
secondaries. Use a separate "sampled" flag so that later rescans, which
would read the renumbered runtime value, never overwrite the cached
number, and a "valid" flag so users can tell whether anything was
recorded.

Signed-off-by: Mario Limonciello <mario.limonciello@xxxxxxx>
---
drivers/pci/probe.c | 16 ++++++++++++++--
include/linux/pci.h | 4 ++++
2 files changed, 18 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 27008e2ea5afc..f20a4b8f7a23b 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -505,14 +505,26 @@ static void pci_read_bridge_mmio_pref(struct pci_dev *dev, struct resource *res,
static void pci_read_bridge_windows(struct pci_dev *bridge)
{
u32 buses;
+ u8 secondary;
+ u8 subordinate;
u16 io;
u32 pmem, tmp;
struct resource res;
pci_read_config_dword(bridge, PCI_PRIMARY_BUS, &buses);
res.flags = IORESOURCE_BUS;
- res.start = FIELD_GET(PCI_SECONDARY_BUS_MASK, buses);
- res.end = FIELD_GET(PCI_SUBORDINATE_BUS_MASK, buses);
+ secondary = FIELD_GET(PCI_SECONDARY_BUS_MASK, buses);
+ subordinate = FIELD_GET(PCI_SUBORDINATE_BUS_MASK, buses);
+ res.start = secondary;
+ res.end = subordinate;
+
+ if (!bridge->fw_sec_bus_sampled) {
+ bridge->fw_sec_bus_sampled = true;
+ if (secondary > 0 && secondary < 0xff) {
+ bridge->fw_sec_busnr = secondary;
+ bridge->fw_sec_bus_valid = true;
+ }
+ }

I believe the original suggestion from Bjorn [1] to do this in pci_read_bridge_windows is to avoid these extra checks as it's one-time, and also to make sure it is done only for bridge devices.

[1] https://patchwork.freedesktop.org/patch/763534/

Thanks,
Lijo

pci_info(bridge, "PCI bridge to %pR%s\n", &res,
bridge->transparent ? " (subtractive decode)" : "");
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 5ffcf5ce8c966..045157488b8e7 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -363,6 +363,8 @@ struct pci_dev {
struct pci_slot *slot; /* Physical slot this device is in */
unsigned int devfn; /* Encoded device & function index */
+ /* Firmware secondary bus number saved across bridge scan passes */
+ unsigned char fw_sec_busnr;
unsigned short vendor;
unsigned short device;
unsigned short subsystem_vendor;
@@ -414,6 +416,8 @@ struct pci_dev {
unsigned int pme_poll:1; /* Poll device's PME status bit */
unsigned int pinned:1; /* Whether this dev is pinned */
unsigned int config_rrs_sv:1; /* Config RRS software visibility */
+ unsigned int fw_sec_bus_valid:1; /* Firmware secondary bus number usable */
+ unsigned int fw_sec_bus_sampled:1; /* Firmware secondary bus number captured */
unsigned int imm_ready:1; /* Supports Immediate Readiness */
unsigned int d1_support:1; /* Low power state D1 is supported */
unsigned int d2_support:1; /* Low power state D2 is supported */