[PATCH] arm64: dts: qcom: monaco-arduino-monza: Add Waveshare 8" DSI touch overlay
From: Vishnu Saini
Date: Fri Nov 13 2026 - 15:08:53 EST
Add an overlay for the Waveshare 8" DSI TOUCH-A kit on the DSI0
connector: the Waveshare GPIO expander (panel supplies, resets,
backlight), the Goodix gt9271 touch controller, the supply regulators
and the JD9365DA based panel.
The expander and touch controller sit on the CCI0 I2C bus, so enable
cci0 for them.
DSI0 is shared with the on-board HDMI path, so disable adv7535, the HDMI
connector and the hdmi-mi2s-playback-dai-link sound node, which would
otherwise wait on the disabled adv7535 codec. HDMI audio is therefore
unavailable while the overlay is applied. Add the hdmi_connector and
hdmi_mi2s_playback_dai_link labels to the base DTS for this.
Co-developed-by: Shashank Maurya <shashank.maurya@xxxxxxxxxxxxxxxx>
Signed-off-by: Shashank Maurya <shashank.maurya@xxxxxxxxxxxxxxxx>
Signed-off-by: Vishnu Saini <vishnu.saini@xxxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/Makefile | 5 ++
...naco-arduino-monza-waveshare-8-dsi-touch-a.dtso | 100 +++++++++++++++++++++
arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts | 4 +-
3 files changed, 107 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 8329c06b60a3..faa0e0f7b867 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -83,6 +83,11 @@ dtb-$(CONFIG_ARCH_QCOM) += monaco-arduino-monza.dtb
monaco-arduino-monza-el2-dtbs := monaco-arduino-monza.dtb monaco-el2.dtbo
dtb-$(CONFIG_ARCH_QCOM) += monaco-arduino-monza-el2.dtb
+
+monaco-arduino-monza-waveshare-8-dsi-touch-a-dtbs := monaco-arduino-monza.dtb monaco-el2.dtbo monaco-arduino-monza-waveshare-8-dsi-touch-a.dtbo
+
+dtb-$(CONFIG_ARCH_QCOM) += monaco-arduino-monza-waveshare-8-dsi-touch-a.dtb
+dtb-$(CONFIG_ARCH_QCOM) += monaco-arduino-monza-waveshare-8-dsi-touch-a.dtbo
dtb-$(CONFIG_ARCH_QCOM) += monaco-ac-evk.dtb
dtb-$(CONFIG_ARCH_QCOM) += monaco-evk.dtb
diff --git a/arch/arm64/boot/dts/qcom/monaco-arduino-monza-waveshare-8-dsi-touch-a.dtso b/arch/arm64/boot/dts/qcom/monaco-arduino-monza-waveshare-8-dsi-touch-a.dtso
new file mode 100644
index 000000000000..003c5bcea497
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/monaco-arduino-monza-waveshare-8-dsi-touch-a.dtso
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+ panel_avdd: regulator-panel-avdd {
+ compatible = "regulator-fixed";
+ regulator-name = "panel-avdd";
+ gpios = <&wsgpio 0 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ panel_iovcc: regulator-panel-iovcc {
+ compatible = "regulator-fixed";
+ regulator-name = "panel-iovcc";
+ gpios = <&wsgpio 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ regulator-panel-vcc {
+ compatible = "regulator-fixed";
+ regulator-name = "panel-vcc";
+ gpios = <&wsgpio 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+};
+
+&adv7535 {
+ status = "disabled";
+};
+
+&cci0 {
+ pinctrl-0 = <&cci0_0_default>;
+ pinctrl-1 = <&cci0_0_sleep>;
+ pinctrl-names = "default", "sleep";
+ status = "okay";
+};
+
+&cci0_i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wsgpio: gpio@45 {
+ compatible = "waveshare,dsi-touch-gpio";
+ reg = <0x45>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ touchscreen@5d {
+ compatible = "goodix,gt9271";
+ reg = <0x5d>;
+ reset-gpios = <&wsgpio 9 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&hdmi_connector {
+ status = "disabled";
+};
+
+&hdmi_mi2s_playback_dai_link {
+ status = "disabled";
+};
+
+&mdss_dsi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ vdda-supply = <&vreg_l1c>;
+
+ panel@0 {
+ compatible = "waveshare,8.0-dsi-touch-a", "jadard,jd9365da-h3";
+ reg = <0>;
+ backlight = <&wsgpio>;
+ reset-gpios = <&wsgpio 1 GPIO_ACTIVE_LOW>;
+ vccio-supply = <&panel_iovcc>;
+ vdd-supply = <&panel_avdd>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&mdss_dsi0_out>;
+ };
+ };
+ };
+};
+
+&mdss_dsi0_out {
+ data-lanes = <0 1 2 3>;
+ remote-endpoint = <&panel_in>;
+};
+
+&mdss_dsi0_phy {
+ vdds-supply = <&vreg_l4a>;
+};
diff --git a/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts b/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts
index 9ac2a04b302d..f518db091092 100644
--- a/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts
+++ b/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts
@@ -51,7 +51,7 @@ button-home {
};
};
- hdmi-connector {
+ hdmi_connector: hdmi-connector {
compatible = "hdmi-connector";
label = "hdmi";
type = "a";
@@ -113,7 +113,7 @@ platform {
};
};
- hdmi-mi2s-playback-dai-link {
+ hdmi_mi2s_playback_dai_link: hdmi-mi2s-playback-dai-link {
link-name = "HDMI Playback";
codec {
---
base-commit: aaa2f954c21b205a0bcd0961e5b2be4e82e58455
change-id: 20261112-monza_waveshare_dtso-9f9934f7aa77
Best regards,
--
Vishnu Saini <vishnu.saini@xxxxxxxxxxxxxxxx>