RE: [PATCH v8 4/4] arm64: dts: renesas: r9a08g046l48-smarc: Enable USB2.0 support

From: Biju Das

Date: Fri Nov 13 2026 - 16:27:23 EST


Hi Geert,

> -----Original Message-----
> From: Biju Das <biju.das.au@xxxxxxxxx>
> Sent: 04 November 2026 15:15
> Subject: [PATCH v8 4/4] arm64: dts: renesas: r9a08g046l48-smarc: Enable USB2.0 support
>
> From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
>
> Enable USB2.0 Host/Function on the RZ/G3L SMARC EVK board.
>
> Drop the explicit "disabled" overrides for the OHCI, EHCI and HSUSB nodes, as they are disabled by
> default in the SoC DTSI. Enable the USB PHY controller and both USB2 PHYs, with VBUS supplies, and add
> the USB0 pin control (OVRCUR/VBUSEN). Port 1 has no OTG pins.
>
> Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> ---
> v7->v8:
> * Updated commit header.
> * Dropped redundant nodes from board dts as it is defined in common
> board dtsi
> * Dropped usb1_pins.
> ---
> arch/arm64/boot/dts/renesas/r9a08g046l48-smarc.dts | 42 +++++++++++-----------
> 1 file changed, 22 insertions(+), 20 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/renesas/r9a08g046l48-smarc.dts
> b/arch/arm64/boot/dts/renesas/r9a08g046l48-smarc.dts
> index 68d7b579e352..9ffaead2c6be 100644
> --- a/arch/arm64/boot/dts/renesas/r9a08g046l48-smarc.dts
> +++ b/arch/arm64/boot/dts/renesas/r9a08g046l48-smarc.dts
> @@ -71,18 +71,6 @@ codec_dai: codec {
> #endif
> };
>
> <RZG3L_PORT_PINMUX(H, 2, 9)>, /* SSIF0_RCK */
> <RZG3L_PORT_PINMUX(H, 3, 9)>; /* SSIF0_TXD */
> };
> +
> + usb0_pins: usb0 {
> + pinmux = <RZG3L_PORT_PINMUX(3, 0, 12)>, /* USB20_OVRCUR */
> + <RZG3L_PORT_PINMUX(3, 1, 12)>; /* USB20_VBUSEN */
> + };


I am seeing "usb usb1-port1: over-current condition" message on RZ/G3L,
if I don't define usb1 pins.

These pins are connected to SoC and not connected to carrier as it is using
USB hub.

For me, it looks like the pin is floating, if we don't initialize the pinfunction
and triggering over-current message on G3L and not on G3E.

+ usb1_pins: usb1 {
+ pinmux = <RZG3L_PORT_PINMUX(3, 4, 12)>, /* USB21_OVRCUR */
+ <RZG3L_PORT_PINMUX(3, 5, 12)>; /* USB21_VBUSEN */
+ };
+

Cheers,
Biju