[PATCH v4 0/2] iio: adc: add driver for Texas Instruments TLA2528 adc

From: Maxime Chevallier

Date: Fri Nov 13 2026 - 16:40:26 EST


Hi everyone,

This is V4 for the TI TLA2528 driver, for the ADC part. This new
revision contains a small amount of changes, after the reviews from
Joshua, Andy, Jonathan, and sashiko.

Thanks everyone for the quick feedback,

Maxime

V4:
- Return -EIO on a short read in tla2528_read(), from Joshua
- Drop mod_devicetable.h, include asm/byteorder.h
- Rename vref_mv to vref_mV
- Drop the L: entry in MAINTAINERS

V3: https://lore.kernel.org/r/20261104125726.1754980-1-maxime.chevallier@xxxxxxxxxxx
- Require channels to be described
- Use guard()
- Add Datasheet link
- Drop the unused registers
- Use named initializers in the id table
- Collect Conor's Ack

V2: https://lore.kernel.org/r/20261030164705.297354-1-maxime.chevallier@xxxxxxxxxxx
- Describe AVDD and DVDD in the bindings instead of vref.
- Add gpio-controller
- Allow describing individual ADC channels
- Switch to regmap with caching
- Reset the chip at probe time
- Small cleanups following all the reviews
- Moved MAINTAINERS to patch 1

V1: https://lore.kernel.org/linux-iio/20251223155534.220504-1-maxime.chevallier@xxxxxxxxxxx/

Maxime Chevallier (2):
dt-bindings: iio: adc: add Texas Instruments TLA2528
iio: adc: add driver for Texas Instruments TLA2528 adc

.../bindings/iio/adc/ti,tla2528.yaml | 91 ++++++++
MAINTAINERS | 6 +
drivers/iio/adc/Kconfig | 12 +
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/ti-tla2528.c | 218 ++++++++++++++++++
5 files changed, 328 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,tla2528.yaml
create mode 100644 drivers/iio/adc/ti-tla2528.c

--
2.56.0