Re: [PATCH v3 4/4] ARM: OMAP2+: ti81xx: use non-scalable voltage domains

From: Andreas Kemnade

Date: Fri Nov 13 2026 - 17:14:15 EST


On Fri, 13 Nov 2026 22:30:50 +0100
Ettore Chimenti <ettore.chimenti@xxxxxxxxxx> wrote:

> TI81xx SoCs reuse omap3xxx_voltagedomains_init(), which registers the
> OMAP34xx/36xx voltage domains for every SoC except AM35xx. Those
> domains are marked scalable and reference OMAP3 Voltage Controller and
> Voltage Processor instances, which do not exist on DM814x/DM816x, and
> no PMIC data is registered for these SoCs either.
>
> As a result, omap_voltage_late_init() tries to set them up on every
> boot and bails out early with:
>
> omap_voltage_late_init: Could not get sys clk.
>
> Adding a "sys_ck" clock alias would only push the failure further into
> omap_vc_init_channel() and omap_vp_init(), which then complain about
> missing PMIC data.
>
> TI81xx has no voltage scaling support in mainline, so, as done for
> AM35xx in commit ddf536d0d7e1 ("ARM: OMAP: AM3517/3505: fix crash on
> boot due to incorrect voltagedomain data"), register the non-scalable
> voltage domains instead. They still provide the "mpu_iva", "core" and
> "wkup" domains needed by the powerdomain data, and
> omap_voltage_late_init() now skips them.
>
> Signed-off-by: Ettore Chimenti <ettore.chimenti@xxxxxxxxxx>

Reviewed-by: Andreas Kemnade <andreas@xxxxxxxxxxxx>
> ---
> arch/arm/mach-omap2/voltagedomains3xxx_data.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
> index e98a3f289c27..478f5eb2a17f 100644
> --- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c
> +++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
> @@ -119,7 +119,7 @@ void __init omap3xxx_voltagedomains_init(void)
> omap3_voltdm_mpu.vc_param = &omap3_mpu_vc_data;
> omap3_voltdm_core.vc_param = &omap3_core_vc_data;
>
> - if (soc_is_am35xx())
> + if (soc_is_am35xx() || soc_is_ti81xx())
> voltdms = voltagedomains_am35xx;
> else
> voltdms = voltagedomains_omap3;
>