[PATCH v17 1/7] phy: rockchip: usbdp: Disable USB3 port during normal power-on

[Sebastian Reichel]

In the reset path, the USB3 port is disabled. This re-routes the clock
going from the PHY to the USB3 controller. This adds the same to the
normal power-on path, so that it behaves exactly the same (except that
the clocks routed to the PHY stay enabled in the reset path).

This hasn't been done so far, as it requires the recently introduced
PHY reset infrastructure to avoid the PHY PLL not locking during
startup.

Tested-by: Igor Paunovic <royalnet026@xxxxxxxxx> # Orange Pi 5 Plus
Signed-off-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
---
 drivers/phy/rockchip/phy-rockchip-usbdp.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index 9c6d921b9191..d01a819bf794 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -1051,6 +1051,9 @@ static int rk_udphy_power_on(struct rk_udphy *udphy, u8 mode)
 	if (udphy->status == UDPHY_MODE_NONE) {
 		rk_udphy_run_reset_handler(udphy, true);
 
+		rk_udphy_u3_port_disable(udphy, true);
+		udelay(10);
+
 		ret = rk_udphy_setup(udphy);
 		if (ret) {
 			rk_udphy_run_reset_handler(udphy, false);

-- 
2.53.0