Re: [PATCH v4 2/3] riscv: dts: spacemit: k3-deepcomputing-fml13v05: add USB controller and USB phy support
From: Yixun Lan
Date: Sat Nov 14 2026 - 02:30:47 EST
Hi Sandie,
On 11:33 Mon 09 Nov , Sandie Cao wrote:
> Add USB device node (b, c, d) to DeepComputing FML13V05 board.
..
> USB A works on otg mode, it isn't configured currently.
Drop it, not really useful to mention there, irrelevant to this patch.
Currently, No USB A port support is merged in mainline code.
FYI, Chunyan submitted a patch for adding peripheral support of USB A.
https://lore.kernel.org/all/20261105103125.2727341-1-chunyan.zhang@xxxxxxxxxxxxxxxxxx/
> - 4 USB-C Ports
~~~~~ USB Type-C? less confusing
> - Port 1: PD 3.0 (65W Max), USB 3.2 Gen 1
> - Port 2: PD 3.0 (65W Max), USB 3.2 Gen 1, DP 1.4 (4K@60Hz)
> - Port 3 & 4: USB 3.2 Gen 1
For "Port X" here, is it a naming from FML13V05's schematic?
would be great to mention which specific USB 3.0 controller (Port B, C, D)
of the SoC it connect to..
>
> Signed-off-by: Sandie Cao <sandie.cao@xxxxxxxxxxxxxxxx>
> ---
> .../spacemit/k3-deepcomputing-fml13v05.dts | 50 +++++++++++++++++++
> 1 file changed, 50 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts b/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts
> index e061233c15a3..bcd533484a73 100644
> --- a/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts
> +++ b/arch/riscv/boot/dts/spacemit/k3-deepcomputing-fml13v05.dts
> @@ -172,8 +172,58 @@ dldo7: dldo7 {
> };
> };
>
> +&combophy {
> + spacemit,apmu = <&syscon_apmu 0x17>;
> + status = "okay";
> +};
> +
> &uart0 {
> pinctrl-names = "default";
> pinctrl-0 = <&uart0_0_cfg>;
> status = "okay";
> };
> +
> +&usb2_host {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "okay";
> +
> + hub@1 {
> + compatible = "usb5e3,608";
> + reg = <1>;
> + };
> +};
> +
> +&usb2_phy {
> + status = "okay";
> +};
> +
> +&usb3b_u2phy {
> + status = "okay";
> +};
> +
> +&usb3b {
> + phys = <&usb3b_u2phy>, <&combophy 2 PHY_TYPE_USB3>;
> + phy-names = "usb2-phy", "usb3-phy";
> + status = "okay";
> +};
> +
> +&usb3c_u2phy {
> + status = "okay";
> +};
> +
> +&usb3c {
> + phys = <&usb3c_u2phy>, <&combophy 3 PHY_TYPE_USB3>;
> + phy-names = "usb2-phy", "usb3-phy";
> + status = "okay";
> +};
> +
> +&usb3d_u2phy {
> + status = "okay";
> +};
> +
> +&usb3d {
> + phys = <&usb3d_u2phy>, <&combophy 4 PHY_TYPE_USB3>;
> + phy-names = "usb2-phy", "usb3-phy";
> + status = "okay";
> +};
> --
> 2.43.0
--
Yixun Lan (dlan)