[PATCH v5 0/3] iio: proximity: sx93xx: keep the IRQ balanced across suspend and resume

From: Arnav Kapoor

Date: Sat Nov 14 2026 - 02:36:25 EST


sx9310, sx9324 and sx9360 disable the interrupt in suspend before
anything that can fail, and don't enable it again when suspend or resume
fails. One patch per driver, as the Fixes tags differ.

Changes in v5:
- Disable the interrupt with disable_irq() before taking the mutex,
and enable it again if suspend fails. v4 called disable_irq_nosync()
at the end of suspend, so a threaded handler woken during the
register writes could run after suspend returned. Found by Sashiko.
- Move the register accesses into a *_sleep() helper per driver so the
mutex is released before the interrupt is re-enabled on failure
- Rebase on fixes-togreg

v4: https://lore.kernel.org/all/20261101102518.22757-1-kapoorarnav43@xxxxxxxxx/
v3: https://lore.kernel.org/all/20261028220444.70121-1-kapoorarnav43@xxxxxxxxx/
v2: https://lore.kernel.org/all/20261026112342.65917-1-kapoorarnav43@xxxxxxxxx/
v1:
https://lore.kernel.org/all/20261026100322.16720-1-kapoorarnav43@xxxxxxxxx/
https://lore.kernel.org/all/20261026100408.16874-1-kapoorarnav43@xxxxxxxxx/
https://lore.kernel.org/all/20261026100450.17023-1-kapoorarnav43@xxxxxxxxx/

Compile-tested only (W=1); I don't have the hardware and haven't
reproduced a failing suspend.

Arnav Kapoor (3):
iio: proximity: sx9310: keep the IRQ balanced across suspend and
resume
iio: proximity: sx9324: keep the IRQ balanced across suspend and
resume
iio: proximity: sx9360: keep the IRQ balanced across suspend and
resume

drivers/iio/proximity/sx9310.c | 54 ++++++++++++++++++++++------------
drivers/iio/proximity/sx9324.c | 43 ++++++++++++++++++---------
drivers/iio/proximity/sx9360.c | 45 ++++++++++++++++++----------
3 files changed, 94 insertions(+), 48 deletions(-)


base-commit: a6d9114f68c4b5507b2d945bd6d1e37415f913c5
--
2.53.0