[PATCH v5 4/6] media: ipu-bridge: Add ST VD55G0
From: Sergey Lebedev
Date: Sat Nov 14 2026 - 04:59:26 EST
The infrared camera of the Surface Pro 11 with Intel is an ST VD55G0,
enumerated by ACPI as SMO55F0 and wired to the IPU7 over one CSI-2 data
lane.
The vd55g0 driver takes only a link frequency whose MIPI rate, twice it,
is an integer multiple of the input clock. 396 MHz gives 792 Mbps, 33
times the 24 MHz the sensor's SSDB lists on the Surface Pro 8, 9, 10 and
11, and within the sensor's 750 to 1200 Mbps. Peter Marshall's earlier
patch for the Surface Pro 9 used 380 MHz, 760 Mbps, which is not a
multiple of 24 MHz, so the driver would refuse it:
https://lore.kernel.org/all/20260918221705.323510-4-pm@xxxxxxxxxxxxxxxx/
Tested-by: Fernando Rimoli <fernandorimoli11@xxxxxxxxx> # Surface Pro 9, IPU6
Tested-by: Emfox Zhou <emfox@xxxxxxxxxx>
Signed-off-by: Sergey Lebedev <lsa.uz@xxxxx>
---
v5: under IMX681, which is in next now at the place v4 inserted.
Emfox's Tested-by, from the Surface Pro 8.
v4: no change.
v3: moved before VD55G1, for vendor order. imx681 v10 3/3 adds SONY0681
at the same place, so whichever lands second needs a trivial fixup.
drivers/media/pci/intel/ipu-bridge.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/media/pci/intel/ipu-bridge.c b/drivers/media/pci/intel/ipu-bridge.c
index 5e419c7b928..0f04395a2d7 100644
--- a/drivers/media/pci/intel/ipu-bridge.c
+++ b/drivers/media/pci/intel/ipu-bridge.c
@@ -132,6 +132,8 @@ static const struct ipu_sensor_config ipu_supported_sensors[] = {
IPU_SENSOR_CONFIG("TBE20A0", 1, 200000000),
/* Sony IMX681 */
IPU_SENSOR_CONFIG("SONY0681", 1, 969600000),
+ /* STMicroelectronics VD55G0 */
+ IPU_SENSOR_CONFIG("SMO55F0", 1, 396000000),
/* STMicroelectronics VD55G1 (found on Lenovo X1 Carbon G14) */
IPU_SENSOR_CONFIG("TBE20A1", 1, 402000000),
/* Toshiba T4KA3 */
--
2.54.0