Re: [PATCH] mmc: mmci: stm32: handle mmc power up
From: Marek Vasut
Date: Sat Nov 14 2026 - 05:14:19 EST
On 11/13/26 5:53 PM, Christophe KERELLO wrote:
Hello Ulf,This works too, thanks .
On 11/13/26 12:46, Ulf Hansson wrote:
On Thu, Nov 12, 2026 at 7:26 AM Marek Vasut <marex@xxxxxxxxxxxx> wrote:
On 11/11/26 12:45 PM, Ulf Hansson wrote:I think it is a problem, yes. If you have a closer look at what
Hello Ulf,
Does that pose a problem in the MMC_POWER_OFF/UP state ? I agree thisOkay, I see.The controller.- if (ios.power_mode == MMC_POWER_OFF) {What exactly will this reset?
+ if (ios.power_mode == MMC_POWER_OFF ||
+ ios.power_mode == MMC_POWER_UP) {
/* Only a reset could power-off sdmmc */
reset_control_assert(host->rst);
udelay(2);
In that case, this reset also makes us reset preceding updates to any
other registers, for example the clock register. I would not recommend
doing that here, but perhaps there is no better option.
would pose a problem in the MMC_POWER_ON state, but here the card is not ON.
happens in mmci_set_ios(), I think you will agree.
Can you try this?If I may I suggest an alternative solution, perhaps we can manage this
in the ->runtime_resume() callback instead. If the power_mode ==
MMC_POWER_OFF, perhaps do this reset there instead? Would that work?
I have sent a new patch based on your proposal:
https://lore.kernel.org/linux-mmc/20261113-fix-resume-reset- v1-1-115b3da5764d@xxxxxxxxxxx/
It works fine on my side.
Hi Marek,
Could you also test it on your board to confirm that it fixes the issue you reported?