[PATCH v7 00/23] Add CAMSS support for SM8750 and Eliza
From: Wenmeng Liu
Date: Sat Nov 14 2026 - 06:30:10 EST
This series adds CAMSS support for the Qualcomm SM8750 and Eliza SoCs.
SM8750 has CSID 980 and VFE 980. Eliza has CSID 970 and VFE 970, which
are register compatible with 980 apart from the VFE RDI write master
client IDs, so Eliza reuses the SM8750 CSID and VFE support. Both SoCs
have TPG v2.3.0. The CSIPHYs are described as standalone
phy-qcom-mipi-csi2 devices, linked to CAMSS through the OF graph.
SM8750 has 6 CSIPHYs, 3 CSID + 2 CSID Lite, 3 VFE + 2 VFE Lite and 3 TPGs.
Eliza has 4 CSIPHYs, 3 CSID + 1 CSID Lite, 3 VFE + 1 VFE Lite and 2 TPGs.
The series depends on the Kaanapali CAMSS series.
https://lore.kernel.org/all/20261112-kaanapali-camss-v25-0-1d709f57f370@xxxxxxxxxxxxxxxx/
Changes in v7:
- Rework the bindings: describe the SM8750 CSI2 PHY with its own
"qcom,sm8750-csi2-phy" compatible (plus the matching phy-qcom-mipi-csi2
entry) and move the CSIPHYs out of CAMSS as sibling PHY devices linked
through the OF graph. Drop the Reviewed-by tags of the CAMSS binding
- Krzysztof
- Add the "top" register region to the CAMSS binding, a PM clock list for
SM8750, and include the CSID clock scaling patch - Loic
- Clean up the CAMSS binding (reg-names, clock names, unused clocks and
interconnects, iommus description) and reuse the SA8775P TPG resources
- Vladimir, bod
- Rework CSID 980 and move VFE 980 into its own camss-vfe-980.c with
dedicated SM8750 resources, dropping its Reviewed-by - bod
- Drop the two-phase CSIPHY patch, the CSIPHYs are now handled by the
standalone PHY driver
- Add the SM8750 DTS and Eliza support (bindings, driver and DTS)
- Link to v6: https://lore.kernel.org/r/20260721-add-support-for-camss-on-sm8750-v6-0-a5f841061d18@xxxxxxxxxxxxxxxx
Signed-off-by: Wenmeng Liu <wenmeng.liu@xxxxxxxxxxxxxxxx>
---
Hangxiang Ma (11):
dt-bindings: phy: qcom,x1e80100-csi2-phy: Add SM8750 CSI2 PHY
dt-bindings: media: qcom,sm8750-camss: Add SM8750 CAMSS
phy: qcom-mipi-csi2: Add SM8750 support
media: qcom: camss: Add SM8750 compatible
media: qcom: camss: Add PM clock definitions for SM8750
media: qcom: camss: csid: Add support for CSID 980
media: qcom: camss: vfe: Add support for VFE 980
media: qcom: camss: tpg: Add support for v2.3.0 TPG
arm64: dts: qcom: sm8750: Add CAMSS and CSIPHY block definitions
arm64: dts: qcom: sm8750: Add CCI definitions
arm64: dts: qcom: sm8750: Add camera MCLK pinctrl
Loic Poulain (1):
media: qcom: camss: csid: Scale the clocks with the CSI-2 link rate
Wenmeng Liu (11):
dt-bindings: phy: qcom,x1e80100-csi2-phy: Add Eliza CSI2 PHY
dt-bindings: media: qcom,eliza-camss: Add Eliza CAMSS
dt-bindings: i2c: qcom-cci: Document Eliza compatible
media: qcom: camss: Add Eliza compatible
arm64: dts: qcom: sm8750-qrd: Enable S5KJN1 camera sensor
arm64: dts: qcom: eliza: Add CAMSS and CSIPHY block definitions
arm64: dts: qcom: eliza: Add CCI definitions
arm64: dts: qcom: eliza: Add camera MCLK pinctrl
arm64: dts: qcom: eliza-mtp: Add PM8010 PMICs
arm64: dts: qcom: eliza-mtp: Enable rear camera
arm64: dts: qcom: eliza-evk-imx577-camera: Add DT overlay
.../devicetree/bindings/i2c/qcom,i2c-cci.yaml | 2 +
.../bindings/media/qcom,eliza-camss.yaml | 282 ++++++++
.../bindings/media/qcom,sm8750-camss.yaml | 297 +++++++++
.../bindings/phy/qcom,x1e80100-csi2-phy.yaml | 9 +-
arch/arm64/boot/dts/qcom/Makefile | 4 +
.../boot/dts/qcom/eliza-evk-imx577-camera.dtso | 85 +++
arch/arm64/boot/dts/qcom/eliza-mtp.dts | 188 ++++++
arch/arm64/boot/dts/qcom/eliza.dtsi | 512 ++++++++++++++
arch/arm64/boot/dts/qcom/pm8010-eliza.dtsi | 81 +++
arch/arm64/boot/dts/qcom/sm8750-qrd.dts | 72 ++
arch/arm64/boot/dts/qcom/sm8750.dtsi | 735 +++++++++++++++++++++
drivers/media/platform/qcom/camss/Makefile | 2 +
drivers/media/platform/qcom/camss/camss-csid-980.c | 478 ++++++++++++++
drivers/media/platform/qcom/camss/camss-csid.c | 208 ++++--
drivers/media/platform/qcom/camss/camss-csid.h | 1 +
drivers/media/platform/qcom/camss/camss-tpg-gen1.c | 5 +-
drivers/media/platform/qcom/camss/camss-vfe-980.c | 216 ++++++
drivers/media/platform/qcom/camss/camss-vfe.c | 4 +
drivers/media/platform/qcom/camss/camss-vfe.h | 1 +
drivers/media/platform/qcom/camss/camss.c | 229 +++++++
drivers/media/platform/qcom/camss/camss.h | 2 +
drivers/phy/qualcomm/phy-qcom-mipi-csi2-core.c | 1 +
22 files changed, 3370 insertions(+), 44 deletions(-)
---
base-commit: 84abb955b1015477aa11a96e2f3ac1b938b77f48
change-id: 20251126-add-support-for-camss-on-sm8750-506c4de36d88
prerequisite-message-id: 20261112-kaanapali-camss-v25-0-1d709f57f370@xxxxxxxxxxxxxxxx
prerequisite-patch-id: 6108fea87bf95e2911f09bbe7e95fa536c3ce397
prerequisite-patch-id: b347ad60c475f3035b04ec76741e0f1b5f095580
prerequisite-patch-id: a38055fcd5b32fbf7f7f03301a48b4ad8601386b
prerequisite-patch-id: 5faef8cef855ce6fa00e2c7f10f125431ede40a4
prerequisite-patch-id: ddf0ddaef84c2d088d08f17de8d20f6b966ace37
prerequisite-patch-id: 5d7b6860d43c9215836a0d50fb27d2d003d0bfd8
prerequisite-patch-id: 610b107ca35300b00e8edae31dfb959a4501ff66
prerequisite-patch-id: 0bfebf965372eab19b73ad9629cec919795b557a
prerequisite-patch-id: d386de6329dabce0b0a459384d28bf290e170552
prerequisite-patch-id: 702e37b99095301ba1dfb2b48a92f33575178d32
prerequisite-patch-id: bc7b2ea560fb0a75ae9b2858a40f7340cc63bebb
prerequisite-patch-id: 83a0f9a6655a615e796ab850955ff764b9dbbf03
prerequisite-patch-id: a579bc3d977dd6869ddd7e78247982e89bd3e86e
prerequisite-patch-id: 4ab7713c2b3b3df586b644772b04d33152f57a4c
prerequisite-patch-id: cf1743d9aeaa627ed310a663621e172a4c095837
Best regards,
--
Wenmeng Liu <wenmeng.liu@xxxxxxxxxxxxxxxx>