Re: [PATCH] arm64: dts: qcom: hamoa: Move the PCIe and UART graph nodes to the board DTs

[Abel Vesa]

On 26-11-12 16:00:25, Manivannan Sadhasivam wrote:
> hamoa.dtsi describes an empty port/endpoint pair under the pcie4 Root Port
> and another one under uart14 node. Both belong to the M.2 Key E connector
> and only the Hamoa and Purwa IoT EVKs ever wire them up. Every other board
> including hamoa.dtsi inherits two dead nodes they never connect.
> 
> Apart from the dead nodes, the change also confuses the pwrctrl driver.
> 
> So drop both pairs from the SoC dtsi and describe them in the two board
> DTs, next to the connector they belong to.
> 
> Fixes: 014501d141ed ("arm64: dts: qcom: hamoa: Add graph port/endpoint anchors to pcie4_port0 and uart14")
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxxxxxxxx>

Reviewed-by: Abel Vesa <abel.vesa@xxxxxxxxxxxxxxxx>