Re: [PATCH v2 5/7] hwmon: (nct6683) Name the sensors of the ASRock B850 Steel Legend WiFi

[Guenter Roeck]

On Wed, Nov 11, 2026 at 09:28:36AM +0100, Johan Dahlin wrote:
> The inputs are labeled after the monitoring source of the EC, such as
> "Thermistor 14" or "VIN5", which says nothing about what they measure.
> The UEFI setup of this board names them on its H/W Monitor page.
> 
> Add a per-board table of sensor names keyed on the monitoring source and
> fill it in for the ASRock B850 Steel Legend WiFi. Sources without an
> entry keep their generic name.
> 
> The CPU temperature matches k10temp and the voltages match their nominal
> values. Which thermistor is the M/B one was inferred from the readings.
> 
> Signed-off-by: Johan Dahlin <jdahlin@xxxxxxxxx>

NACK, please don't do that. Add desired per-board names to sensors3.conf
instead.

Thanks,
Guenter