Re: [PATCH v2 3/3] drm/amd/display: report synced displays to PowerPlay for MCLK switch
From: Alex Deucher
Date: Sat Nov 14 2026 - 14:30:50 EST
On Sat, Nov 14, 2026 at 9:18 AM Richard Lane <richardlanedev@xxxxxxxxx> wrote:
>
> On 13/11/2026 14:05, Alex Deucher wrote:
> > On Thu, Nov 12, 2026 at 7:15 PM Richard Lane <richardlanedev@xxxxxxxxx> wrote:
> >>
> >> On 10/11/2026 19:59, Alex Deucher wrote:
> >>> On Tue, Nov 10, 2026 at 1:49 PM Richard Lane <richardlanedev@xxxxxxxxx> wrote:
> >>>>
> >>>> On 09/11/2026 20:34, Alex Deucher wrote:
> >>>>> On Mon, Nov 2, 2026 at 3:31 AM Richard Lane <richardlanedev@xxxxxxxxx> wrote:
> >>>>>>
> >>>>>> When driving multiple displays or tiled panels with identical timings
> >>>>>> (such as the two 2560x2880 tiles of an Apple 5K iMac panel), Display
> >>>>>> Core's program_timing_sync() aligns the CRTCs into a timing sync group
> >>>>>> in hardware during dc_commit_streams().
> >>>>>>
> >>>>>> However, on DCE < 12, Display Core leaves
> >>>>>> pp_display_cfg.all_displays_in_sync unset. Because PowerPlay is not
> >>>>>> informed that the streams have synchronized vertical blanking intervals,
> >>>>>> SMU7 prevents MCLK switching at idle or causes modeset underflows.
> >>>>>>
> >>>>>> If all active streams belong to the same timing sync group
> >>>>>> (timing_sync_info.group_size == params.stream_count), report
> >>>>>> all_displays_in_sync = true to PowerPlay after committing the streams so
> >>>>>> SMU7 can safely downclock MCLK at idle.
> >>>>>>
> >>>>>
> >>>>> Looking at this a little deeper, the function bw_calcs() in
> >>>>> dce_calcs.c already calculates all_displays_in_sync using the helper
> >>>>> all_displays_in_sync(). Can you look into this and figure out why
> >>>>> that is not working as expected? My concern with this patch is that
> >>>>> DCE and DCN have different logic for handling mclk switching so I'm
> >>>>> not sure it's safe to call dm_pp_apply_display_requirements() directly
> >>>>> from common code.
> >>>>>
> >>>>> Thanks,
> >>>>>
> >>>>> Alex
> >>>>
> >>>> Moving it to dce_clk_mgr.c and using resource_are_streams_timing_synchronizable() also works. Is that a solution?
> >>>
> >>> I think that would be preferred, but in general, why doesn't the
> >>> current flow I described work? The function bw_calcs() dce_calcs.c
> >>> already calculates the all_displays_in_sync flag using the helper
> >>> all_displays_in_sync(). Is all_displays_in_sync() not checking
> >>> something properly or is the overall call timing wrong such that
> >>> all_displays_in_sync() can't properly calculate whether all of the
> >>> displays are synced at the point that it gets called?
> >>>
> >>> Alex
> >>>
> >>
> >> I think this could be limited to DCE 6,8,10 rather than DCE < 12 as in these
> >> cases DC uses dce100_validate_bandwdith() which doesn't call bw_calcs() and
> >> dce_pplib_apply_display_requirements() in dce_clk_mgr.c so
> >> pp_display_cfg->all_displays_in_sync is unset.
> >
> > How about adding bw_calcs() to dce100_validate_bandwdith()? Or if
> > there are issues there, just add the all_displays_in_sync() checks to
> > dce100_validate_bandwdith().
> >
> > Alex
> >
>
> bw_calcs() itself cannot be called in dce100_validate_bandwidth() because
> bw_calcs_init() only initializes dc->bw_dceip and dc->bw_vbios on DCE
> 11.0, 11.2, and 12.0.
>
> However, adding the all_displays_in_sync check directly to
> dce100_validate_bandwidth() (which is shared by DCE 6, 8, and 10) and
> copying context->bw_ctx.bw.dce.all_displays_in_sync to
> pp_display_cfg->all_displays_in_sync in
> dce_pplib_apply_display_requirements() works. Is this solution preferable?
Yes, this looks great. Thanks for reworking it.
Alex
>
> diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dce100/dce_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dce100/dce_clk_mgr.c
> --- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dce100/dce_clk_mgr.c
> +++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dce100/dce_clk_mgr.c
> @@ -320,6 +320,9 @@ static void dce_pplib_apply_display_requirements(
> {
> struct dm_pp_display_configuration *pp_display_cfg = &context->pp_display_cfg;
>
> + pp_display_cfg->all_displays_in_sync =
> + context->bw_ctx.bw.dce.all_displays_in_sync;
> +
> dce110_fill_display_configs(context, pp_display_cfg);
>
> if (memcmp(&dc->current_state->pp_display_cfg, pp_display_cfg, sizeof(*pp_display_cfg)) != 0)
> diff --git a/drivers/gpu/drm/amd/display/dc/resource/dce100/dce100_resource.c b/drivers/gpu/drm/amd/display/dc/resource/dce100/dce100_resource.c
> --- a/drivers/gpu/drm/amd/display/dc/resource/dce100/dce100_resource.c
> +++ b/drivers/gpu/drm/amd/display/dc/resource/dce100/dce100_resource.c
> @@ -692,6 +692,14 @@ enum dc_status dce100_validate_bandwidth(
> /* TODO implement when needed but for now hardcode max value*/
> context->bw_ctx.bw.dce.dispclk_khz = 681000;
> context->bw_ctx.bw.dce.yclk_khz = 250000 * MEMORY_TYPE_MULTIPLIER_CZ;
> + context->bw_ctx.bw.dce.all_displays_in_sync = context->stream_count > 1;
> + for (i = 1; i < context->stream_count; i++) {
> + if (!resource_are_streams_timing_synchronizable(
> + context->streams[0], context->streams[i])) {
> + context->bw_ctx.bw.dce.all_displays_in_sync = false;
> + break;
> + }
> + }
> } else {
> /* On DCE 6.0 and 6.4 the PLL0 is both the display engine clock and
> * the DP clock, and shouldn't be turned off. Just select the display
> @@ -703,6 +711,7 @@ enum dc_status dce100_validate_bandwidth(
> context->bw_ctx.bw.dce.dispclk_khz = 0;
>
> context->bw_ctx.bw.dce.yclk_khz = 0;
> + context->bw_ctx.bw.dce.all_displays_in_sync = false;
> }
>
> return DC_OK;
>
> Richard
>
> >>
> >> Richard
> >>
> >>>>
> >>>> diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dce100/dce_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dce100/dce_clk_mgr.c
> >>>> --- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dce100/dce_clk_mgr.c
> >>>> +++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dce100/dce_clk_mgr.c
> >>>> @@ -31,6 +31,7 @@
> >>>> #include "dmcu.h"
> >>>> #include "core_types.h"
> >>>> #include "dal_asic_id.h"
> >>>> +#include "resource.h"
> >>>>
> >>>> /*
> >>>> * Currently the register shifts and masks in this file are used for dce100 and dce80
> >>>> @@ -319,8 +320,17 @@ static void dce_pplib_apply_display_requirements(
> >>>> struct dc_state *context)
> >>>> {
> >>>> struct dm_pp_display_configuration *pp_display_cfg = &context->pp_display_cfg;
> >>>> + int j;
> >>>>
> >>>> dce110_fill_display_configs(context, pp_display_cfg);
> >>>> + pp_display_cfg->all_displays_in_sync = pp_display_cfg->display_count > 1;
> >>>> + for (j = 1; j < context->stream_count; j++) {
> >>>> + if (!resource_are_streams_timing_synchronizable(
> >>>> + context->streams[0], context->streams[j])) {
> >>>> + pp_display_cfg->all_displays_in_sync = false;
> >>>> + break;
> >>>> + }
> >>>> + }
> >>>>
> >>>> if (memcmp(&dc->current_state->pp_display_cfg, pp_display_cfg, sizeof(*pp_display_cfg)) != 0)
> >>>> dm_pp_apply_display_requirements(dc->ctx, pp_display_cfg);
> >>>>
> >>>> Richard
> >>>>
> >>>>>
> >>>>>> Signed-off-by: Richard Lane <richardlanedev@xxxxxxxxx>
> >>>>>> ---
> >>>>>> drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 10 ++++++++++
> >>>>>> 1 file changed, 10 insertions(+)
> >>>>>>
> >>>>>> diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> >>>>>> index 74cd88d8d580..b4531383437e 100644
> >>>>>> --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> >>>>>> +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> >>>>>> @@ -4777,6 +4777,16 @@ static void amdgpu_dm_commit_streams(struct drm_atomic_commit *state,
> >>>>>> dc_exit_ips_for_hw_access(dm->dc);
> >>>>>> WARN_ON(!dc_commit_streams(dm->dc, ¶ms));
> >>>>>>
> >>>>>> + if (params.stream_count > 1 &&
> >>>>>> + dm->dc->current_state->stream_status[0].timing_sync_info.group_size ==
> >>>>>> + params.stream_count) {
> >>>>>> + struct dm_pp_display_configuration *pp_cfg =
> >>>>>> + &dm->dc->current_state->pp_display_cfg;
> >>>>>> +
> >>>>>> + pp_cfg->all_displays_in_sync = true;
> >>>>>> + dm_pp_apply_display_requirements(dm->dc->ctx, pp_cfg);
> >>>>>> + }
> >>>>>> +
> >>>>>> bool frl_stream_found = false;
> >>>>>>
> >>>>>> for (i = 0; i < params.stream_count; i++) {
> >>>>>> --
> >>>>>> 2.55.0
> >>>>
> >>
>