Re: [PATCH 0/2] power: supply: Add Silicon Mitus SM5714 fuel gauge
From: Asdlerto Korry
Date: Sat Nov 14 2026 - 14:48:30 EST
Hi Nizat,
I tested this series on a Samsung Galaxy M52 5G (SM-M526B, sm7325),
where the SM5714 fuel gauge sits at 0x71 on a QUP I2C bus.
The driver binds and the readings match what I get with the vendor
setup: on USB it reports Charging with a positive current, unplugged
it reports Discharging (around -400 mA, 3.80 V), and upower picks up
the battery and percentage correctly.
Tested-by: Asdlerto Korry <korryasdlerto@xxxxxxxxx> # Samsung Galaxy M52 5G
A few notes, none of them blocking:
- The capacity truncates (SOC >> 8). With the raw SOC at about 44.6 %
it reports 44, while rounding would give 45. Rounding might match
the vendor UI better, but either is fine.
- The M52 has a battery NTC on an ADC channel. If you're interested,
I could send a follow-up on top of your series that adds TEMP through
io-channels, and VOLTAGE_OCV from the gauge, once this is merged.
Thanks for working on this!
Asdlerto