[BUG] usb: failed altsetting restore leaves xHCI ep with a NULL ring

From: Cheng Yongkang

Date: Sun Nov 15 2026 - 11:37:27 EST


Hi Greg, Mathias,

This one is from reading the code only; I could not reproduce it. It
needs SET_INTERFACE to fail and then the restore of the old altsetting
to fail too, on xHCI, so it is very unlikely in practice.

I know the kerneldoc of usb_set_interface() says that after a failure
the original altsetting may be disabled and drivers cannot rely on any
altsetting being in effect. My concern is only that a later usbfs
ioctl can still reach the HCD with that endpoint and oops.

The sequence, as I read it in next-20261113:

1. usb_set_interface() calls usb_disable_interface(dev, iface, false)
and then usb_hcd_alloc_bandwidth() for the new altsetting. On xHCI,
xhci_check_bandwidth() frees the rings of the old endpoints that
are not reused. xhci_drop_endpoint() does not clear their hcpriv.

2. SET_INTERFACE fails, and the restore call
usb_hcd_alloc_bandwidth(dev, NULL, alt, iface->cur_altsetting)
fails too, for example on a ring allocation failure. Its result is
ignored, and cur_altsetting still points at the old altsetting.

3. USBDEVFS_RESETEP on a bulk or interrupt endpoint of that old
altsetting passes findintfep() and checkintf(). usb_reset_endpoint()
still finds the endpoint, because usb_disable_endpoint() with
reset_hardware=false keeps dev->ep_in/out[], and nothing checks
ep->enabled.

4. xhci_endpoint_reset() sees a non-NULL hcpriv, passes its other
checks, and reaches list_empty(&ep->ring->td_list) with a NULL
ring.

Either side could avoid it: usb_set_interface() could check the
restore result and disable the interface with reset_hardware=true,
or xhci_endpoint_reset() could return early when ep->ring is NULL.
I have a draft of the first, but it is only tested on the normal
altsetting paths, not on this failure. Please tell me if you think it
is worth fixing and where.

Thanks,
Cheng Yongkang