[PATCH 2/2] serial: fsl_lpuart: Enable DMA for TX in console mode
From: Jonas Juffinger via B4 Relay
Date: Sun Nov 15 2026 - 13:03:07 EST
From: Jonas Juffinger <jonas.juffinger@xxxxxxxxxxxx>
Remove the check that disabled TX DMA if the device is in console mode.
The reason for this check was that break detection cannot be efficiently
implemented with DMA. See commit 8cac2f6eb854 ("serial: fsl_lpuart:
disable DMA for console and fix sysrq").
However, break detection only affects the RX path, not the TX path.
The 8-bit LPUART hardware supports using DMA only for TX and not for RX.
I do not have a CPU with the 32-bit LPUART hardware to verify that this
change also work with the 32-bit LPUART. It probably does.
Signed-off-by: Jonas Juffinger <jonas.juffinger@xxxxxxxxxxxx>
---
drivers/tty/serial/fsl_lpuart.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 5817c47e4db3..e569e2c6ffe9 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1765,9 +1765,6 @@ static void lpuart_tx_dma_startup(struct lpuart_port *sport)
u32 uartbaud;
int ret;
- if (uart_console(&sport->port))
- goto err;
-
if (!sport->dma_tx_chan)
goto err;
--
2.43.0