Re: [PATCH 1/2] dt-bindings: phy: qcom: Add SA8797P eUSB2 PHY
From: Manivannan Sadhasivam
Date: Sun Nov 15 2026 - 14:21:12 EST
On 2026-10-27 12:00 +0100, Konrad Dybcio wrote:
> On 10/26/26 10:41 AM, Hiren Gohel wrote:
> > SA8797p platform abstracts resources such as resets, clocks and
> > regulators in firmware. The SCMI firmware exposes multiple protocols to
> > control such resources which are identified by protocol_id.
> >
> > For this USB phy, 2 SCMI protocols are exposed by the firmware:
> > * power domain management protocol (protocol_id=0x11)
> > * performance domain management protocol (protocol_id=0x13)
> >
> > The power domain has 2 indices: 'core' and 'transfer'.
> > * core controls the regulators, the clocks and the reset
> > * transfer only controls the clocks
> >
> > For example, to power on/off the PHY, we should use the 'core' domain.
> > To disable data transfer and keeping power enabled, we should use the
> > 'transfer' domain.
> >
> > Add a new binding for the Synopsys eusb2 High-Speed USB PHY
> > found in SA8797P.
> >
> > Note: the performance domain (0x13) exposes opaques values (0xa to 0x11)
> > for which we don't have any information.
>
> How come we don't have any information for what the firmware
> that ""we"" wrote does?
>
And it always puzzles me how each peripheral invents its own ABI for power
domains :/
- Mani