[PATCH 1/3] dt-bindings: interrupt-controller: econet,en751221-intc: Allow up to 6 parent interrupts
From: Akshat Singh via B4 Relay
Date: Sun Nov 15 2026 - 14:26:23 EST
From: Akshat Singh <automobilehacks@xxxxxxxxx>
The controller is not connected to its parent through a single
interrupt line: it presents the number of the pending interrupt plus
one, in binary, on the CPU interrupt lines IP2-IP7. A CPU in VEIC mode
takes that number as the vector, but without VEIC each line is a
separate interrupt, and the controller has to be chained to all the
lines that can carry it.
Allow listing up to six parent interrupts, one per line.
Signed-off-by: Akshat Singh <automobilehacks@xxxxxxxxx>
---
.../bindings/interrupt-controller/econet,en751221-intc.yaml | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/interrupt-controller/econet,en751221-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/econet,en751221-intc.yaml
index 44c09785e..098fdeaa3 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/econet,en751221-intc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/econet,en751221-intc.yaml
@@ -34,8 +34,13 @@ properties:
interrupt-controller: true
interrupts:
- maxItems: 1
- description: Interrupt line connecting this controller to its parent.
+ minItems: 1
+ maxItems: 6
+ description:
+ CPU interrupt lines connecting this controller to its parent. The
+ controller presents the number of the pending interrupt plus one, in
+ binary, on the CPU interrupt lines IP2-IP7, so it can be connected to
+ up to six of them.
econet,shadow-interrupts:
$ref: /schemas/types.yaml#/definitions/uint32-matrix
--
2.43.0