[PATCH] dmaengine: bcm2835-dma: Add missing of_dma_controller_free()
From: Tomasz Unger
Date: Sun Nov 15 2026 - 17:15:27 EST
bcm2835_dma_probe() registers the controller with
of_dma_controller_register(), but of_dma_controller_free() is never
called, neither when dma_async_device_register() fails nor in
bcm2835_dma_remove().
The entry stays on the global of_dma_list and keeps a pointer to the
driver data, which is devm-allocated and freed when the device is
unbound. The next DMA channel request for this node is passed to
bcm2835_dma_xlate() with the freed structure and, depending on what
that memory holds by then, either fails or crashes. As the stale entry
is found first, this still happens after the controller has been bound
again.
On a Raspberry Pi 4 Model B, unbinding vc4 and the DMA controller and
then binding vc4 again results in:
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000018
Call trace:
find_candidate+0x64/0x210 (P)
dma_get_any_slave_channel+0x64/0xd0
bcm2835_dma_xlate+0x24/0x48
of_dma_request_slave_channel+0x178/0x2a8
dma_request_chan+0x20c/0x380
snd_dmaengine_pcm_register+0xa4/0x2a0 [snd_soc_core]
devm_snd_dmaengine_pcm_register+0x60/0xc0 [snd_soc_core]
vc4_hdmi_bind+0x4d4/0x8e8 [vc4]
Free the controller on the probe error path and in remove. In remove,
do it before unregistering the DMA device, so that no channel can be
requested through the node while the device is going away.
The bug was found and the fix drafted with the help of an AI coding
assistant (Claude).
Fixes: 96286b576690 ("dmaengine: Add support for BCM2835")
Cc: stable@xxxxxxxxxxxxxxx
Assisted-by: Claude:claude-fable-5-2
Signed-off-by: Tomasz Unger <tomasz.unger@xxxxxxxx>
---
Verified on a Raspberry Pi 4 Model B: without the patch the sequence
described in the commit message oopses; with it, binding vc4 while the
controller is unbound is deferred and HDMI audio gets its DMA channels
back once the controller is bound again. Both paths (remove and a forced
dma_async_device_register() failure) were also run under KASAN in QEMU
raspi4b: slab-use-after-free in find_candidate() without the patch, no
report with it.
---
drivers/dma/bcm2835-dma.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/dma/bcm2835-dma.c b/drivers/dma/bcm2835-dma.c
index 06d830d36882..cf29d897450e 100644
--- a/drivers/dma/bcm2835-dma.c
+++ b/drivers/dma/bcm2835-dma.c
@@ -1011,13 +1011,15 @@ static int bcm2835_dma_probe(struct platform_device *pdev)
if (rc) {
dev_err(&pdev->dev,
"Failed to register slave DMA engine device: %d\n", rc);
- goto err_no_dma;
+ goto err_of_dma;
}
dev_dbg(&pdev->dev, "Load BCM2835 DMA engine driver\n");
return 0;
+err_of_dma:
+ of_dma_controller_free(pdev->dev.of_node);
err_no_dma:
bcm2835_dma_free(od);
return rc;
@@ -1027,6 +1029,7 @@ static void bcm2835_dma_remove(struct platform_device *pdev)
{
struct bcm2835_dmadev *od = platform_get_drvdata(pdev);
+ of_dma_controller_free(pdev->dev.of_node);
dma_async_device_unregister(&od->ddev);
bcm2835_dma_free(od);
}
---
base-commit: 6628e7d4c6b25c8d18f1345e3a20d21829aae7e4
change-id: 20261115-bcm2835-dma-of-dma-free-ef85776c0914
Best regards,
--
Tomasz Unger <tomasz.unger@xxxxxxxx>