[PATCH net] net: stmmac: preserve RX checksum capability when offload is disabled

From: James Hilliard

Date: Sun Nov 15 2026 - 19:49:26 EST


The GMAC, GMAC4 and XGMAC rx_ipc callbacks return whether checksum offload
is enabled after programming the requested state. A zero return is
therefore expected when hw->rx_csum is zero.

stmmac_hw_setup() treats every zero return as a lack of hardware support
and clears plat->rx_coe. Disabling RX checksum offload with ethtool and
then reopening the interface loses the saved capability. Subsequent
attempts to enable offload are rejected by stmmac_fix_features(), which
uses plat->rx_coe to filter NETIF_F_RXCSUM.

Only clear the capability if offload was requested but could not be
enabled. Keep calling rx_ipc when offload is disabled so that the hardware
is still programmed with the requested state.

Fixes: 0f280e4d23c2 ("stmmac: fix the rx csum feature")
Signed-off-by: James Hilliard <james.hilliard1@xxxxxxxxx>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 25894771e9e9..e162976be2e6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3723,7 +3723,7 @@ static int stmmac_hw_setup(struct net_device *dev)
stmmac_safety_feat_configuration(priv);

ret = stmmac_rx_ipc(priv, priv->hw);
- if (!ret) {
+ if (priv->hw->rx_csum && !ret) {
netdev_warn(priv->dev, "RX IPC Checksum Offload disabled\n");
priv->plat->rx_coe = STMMAC_RX_COE_NONE;
priv->hw->rx_csum = 0;

---
base-commit: aa40afa831ebfe45e40a23721711059f2ac584d4
change-id: 20261115-submit-stmmac-rx-checksum-capability-v1-ef6645788992

Best regards,
--
James Hilliard <james.hilliard1@xxxxxxxxx>