RE: [PATCH rtw-next v5 07/10] wifi: rtw89: send injected control frames through the management path

From: Ping-Ke Shih

Date: Sun Nov 15 2026 - 21:14:51 EST



Enver Ikromov <owner@xxxxxxxxxxxxxx> wrote:
> rtw89_core_get_tx_type() classifies every frame that is neither a
> management nor a null-data frame as data. Injected control frames
> such as a 10-byte ACK or 16-byte RTS therefore go through
> rtw89_core_tx_update_data_info(), which derives a TID and data queue
> from skb->priority and enables AMPDU/QoS related descriptor fields
> that make no sense for them.

Original design is only to send urgent packets via MGMT queue, and
I think no control frame sent vi driver. Instead, firmware/hardware
will sent them.

Did you encounter real problem if CTS/RST goes via AC queue?
I just don't want much conditions in data path.

>
> Classify injected non-data frames as management frames. Frames
> generated by mac80211 itself, such as BlockAckReq, are not affected.

Did you actually see driver sends control frames generated by mac80211?
If so, when and how?

>
> In addition, rtw89_core_tx_update_desc_info() reads hdr->seq_ctrl at
> offset 22 for every frame. Control frames have no sequence control
> field and are shorter than 24 bytes, so only read hdr->seq_ctrl from
> non-control frames whose linear header is long enough to carry it.

I think all control frames have no sequence control, just fill seq=0
for them?

>
> Signed-off-by: Enver Ikromov <owner@xxxxxxxxxxxxxx>
> ---
> drivers/net/wireless/realtek/rtw89/core.c | 16 ++++++++++++++--
> 1 file changed, 14 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/wireless/realtek/rtw89/core.c b/drivers/net/wireless/realtek/rtw89/core.c
> index 54605f7..7003c24 100644
> --- a/drivers/net/wireless/realtek/rtw89/core.c
> +++ b/drivers/net/wireless/realtek/rtw89/core.c
> @@ -637,12 +637,21 @@ static enum rtw89_core_tx_type
> rtw89_core_get_tx_type(struct rtw89_dev *rtwdev,
> struct sk_buff *skb)
> {
> + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
> struct ieee80211_hdr *hdr = (void *)skb->data;
> __le16 fc = hdr->frame_control;
>
> if (ieee80211_is_mgmt(fc) || ieee80211_is_any_nullfunc(fc))
> return RTW89_CORE_TX_TYPE_MGMT;
>
> + /* Injected control frames have no QoS/TID and no data payload, so
> + * send them through the management path. Control frames built by
> + * mac80211 itself (e.g. BlockAckReq) keep using the data path.
> + */

The code self-explain it is injection, no need comment.

But I still wonder this is required? Any problem without this?

> + if (unlikely(info->flags & IEEE80211_TX_CTL_INJECTED) &&
> + !ieee80211_is_data(fc))
> + return RTW89_CORE_TX_TYPE_MGMT;
> +
> return RTW89_CORE_TX_TYPE_DATA;
> }
>
> @@ -1299,7 +1308,7 @@ rtw89_core_tx_update_desc_info(struct rtw89_dev *rtwdev,
> enum btc_pkt_type pkt_type;
> bool upd_wlan_hdr = false;
> bool is_bmc;
> - u16 seq;
> + u16 seq = 0;
>
> desc_info->pkt_size = skb->len;
>
> @@ -1315,7 +1324,10 @@ rtw89_core_tx_update_desc_info(struct rtw89_dev *rtwdev,
> else if (tx_req->vif)
> desc_info->mlo = ieee80211_vif_is_mld(tx_req->vif);
>
> - seq = (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4;
> + /* control frames (e.g. 10-byte ACK/CTS) have no sequence control */
> + if (!ieee80211_is_ctl(hdr->frame_control) &&
> + skb_headlen(skb) >= sizeof(struct ieee80211_hdr_3addr))
> + seq = (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4;

If my thought is correct, here can just

if (ieee80211_is_ctl(hdr->frame_control))
seq = 0;
else
seq = (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4;

> addr_cam = rtw89_get_addr_cam_of(tx_req->rtwvif_link,
> tx_req->rtwsta_link);
> if (addr_cam->valid && desc_info->mlo)
> --
> 2.56.0.windows.4
>