[PATCH v1 0/3] power: supply: s2mu005-battery: add S2MU106 (Samsung Galaxy XCover5)

From: Adil Hüsrev Tepe

Date: Mon Nov 16 2026 - 02:41:10 EST


This series adds support for the Samsung S2MU106 PMIC fuel gauge to the
existing s2mu005-battery driver, for the Samsung Galaxy XCover5
(Exynos850).

The S2MU106 fuel gauge shares the S2MU005's direct voltage, current and
state-of-charge registers and their scaling. This was verified on an
XCover5: with the s2mu005 driver bound to the S2MU106 gauge, voltage,
state of charge and the sign of the charge current all read correctly.
It does not, however, share the MONOUT average-monitoring path, so the
S2MU106 variant exposes only the instantaneous values. The XCover5 also
does not wire the gauge's alert line, which patch 2 accommodates.

1 dt-bindings: add samsung,s2mu106-fuel-gauge
2 make the alert interrupt optional
3 add S2MU106 support

Based on v7.4-rc1.

Tool usage
----------
Prepared during XCover5 mainline bring-up with an AI coding assistant
(Claude Code, Anthropic): it compared the S2MU005/S2MU106 fuel-gauge
register maps, drafted these changes and changelogs, and ran a live A/B
comparison on the device under my direction. I reviewed every line,
tested on hardware, and take responsibility for the series. Review
comments are welcome and I will answer them myself.

Adil Hüsrev Tepe (3):
dt-bindings: power: supply: samsung,s2mu005-fuel-gauge: add S2MU106
power: supply: s2mu005-battery: make the alert interrupt optional
power: supply: s2mu005-battery: add S2MU106 support

.../supply/samsung,s2mu005-fuel-gauge.yaml | 7 +-
drivers/power/supply/s2mu005-battery.c | 71 +++++++++++++++----
2 files changed, 63 insertions(+), 15 deletions(-)

--
2.53.0