[PATCH v2 0/4] Add Parade PS195 bridge support to enable HDMI on Glymur/Mahua/Kalambo CRDs
From: Nabige Aala
Date: Mon Nov 16 2026 - 06:34:50 EST
This series adds initial Linux support for the Parade PS195 DP-to-HDMI
bridge and uses it to enable HDMI on the Qualcomm Glymur CRD family
(Glymur CoB/SiP, Mahua, and Kalambo).
The PS195 operates autonomously using firmware loaded from external
SPI flash — it handles link training, EDID access, and hotplug detection
without host register intervention at runtime, so no existing bridge
driver fits its power-sequencing and reset model.
It introduces:
- a DT binding for PS195 (supplies, optional reset GPIO, and port graph),
- a DRM bridge driver that implements PS195 power sequencing and PM handling, and
- arm64 integration (defconfig + shared glymur-crd.dtsi wiring) so all three
variants can route DP over USB2 QMP combo PHY to HDMI through PS195.
Deps:
PHY PLL change: https://lore.kernel.org/all/20261028-glymur-phy-v3-v6-0-1f1d2e565a66@xxxxxxxxxxxxxxxx/
Glymur commonize change for regulator: https://lore.kernel.org/all/20261106-topic-sip_cob-v3-0-52cd3826ab49@xxxxxxxxxxxxxxxx/
---
Changes in v2:
- Converted the driver from a platform driver to an I2C driver
- Replaced the platform hdmi-bridge root node with a proper I2C child node under &i2c13
- Chane the order of power on and reset action in the driver (Krzysztof)
- Link to v1: https://patch.msgid.link/20261112-mahua-hdmi-v1-0-b463d7b1dd7e@xxxxxxxxxxxxxxxx
To: Mahadevan P <mahadevan.p@xxxxxxxxxxxxxxxx>
To: Andrzej Hajda <andrzej.hajda@xxxxxxxxx>
To: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
To: Robert Foss <rfoss@xxxxxxxxxx>
To: Laurent Pinchart <Laurent.pinchart@xxxxxxxxxxxxxxxx>
To: Jonas Karlman <jonas@xxxxxxxxx>
To: Jernej Skrabec <jernej.skrabec@xxxxxxxxx>
To: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
To: David Airlie <airlied@xxxxxxxxx>
To: Simona Vetter <simona@xxxxxxxx>
To: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
To: Maxime Ripard <mripard@xxxxxxxxxx>
To: Thomas Zimmermann <tzimmermann@xxxxxxx>
To: Rob Herring <robh@xxxxxxxxxx>
To: Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx>
To: Conor Dooley <conor+dt@xxxxxxxxxx>
To: Bjorn Andersson <andersson@xxxxxxxxxx>
To: Konrad Dybcio <konradybcio@xxxxxxxxxx>
To: Abel Vesa <abelvesa@xxxxxxxxxx>
Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
Cc: linux-arm-msm@xxxxxxxxxxxxxxx
Signed-off-by: Nabige Aala <nabige.aala@xxxxxxxxxxxxxxxx>
---
Mahadevan P (4):
dt-bindings: display: bridge: Add Parade PS195
drm/bridge: Add a driver for the Parade PS195
arm64: defconfig: Enable the Parade PS195 bridge
arm64: dts: qcom: glymur-crd: Enable HDMI output via PS195
.../bindings/display/bridge/parade,ps195.yaml | 111 +++++++++++
MAINTAINERS | 7 +
arch/arm64/boot/dts/qcom/glymur-crd.dtsi | 147 +++++++++++++++
arch/arm64/boot/dts/qcom/glymur.dtsi | 6 +
arch/arm64/configs/defconfig | 1 +
drivers/gpu/drm/bridge/Kconfig | 10 +
drivers/gpu/drm/bridge/Makefile | 1 +
drivers/gpu/drm/bridge/parade-ps195.c | 204 +++++++++++++++++++++
8 files changed, 487 insertions(+)
---
base-commit: 944e974742c54a1d8236fe16897644c35ffd6433
change-id: 20261112-mahua-hdmi-8ee75b4fd29a
Best regards,
--
Nabige Aala <nabige.aala@xxxxxxxxxxxxxxxx>