[PATCH 0/8] ACPI: arm64: Support PMU on Heterogeneous Systems
From: Leo Yan
Date: Mon Nov 16 2026 - 13:22:23 EST
This series follows Johnny Fan's SPE/TRBE work [1], which requires
ACPI-specific IRQ affinity handling in the drivers. It provides a common
way to describe PPI affinity for devices created from the MADT.
Register one platform device for each group of CPUs with the same MIDR.
Associate a software node with each device to expose its CPU mask through
platform_get_irq_affinity(). SPE and TRBE drivers can then obtain affinity
without ACPI-specific handling or a processor-container companion.
Grouping by MIDR allows CPU PMU events to follow tasks across compatible
CPUs, including CPUs in different processor containers. SPE and TRBE
require a shared GSI within each group. CPU PMUs can also use per-CPU SPIs
and reuse the platform probe path used for DT. Move the common ACPI device
registration to drivers/acpi/arm64/.
This series has been tested on Orion O6, with four little Cortex-A520
cores (CPUs 2-5) and eight big Cortex-A720 cores (CPUs 0-1 and 6-11).
It exposes the following PMU devices:
# ls /sys/bus/event_source/devices/
arm_spe_0 armv8_pmuv3_0 armv8_pmuv3_1 breakpoint cs_etm kprobe software tracepoint uprobe
# cat /sys/bus/event_source/devices/armv8_pmuv3_0/cpus
0-1,6-11
# cat /sys/bus/event_source/devices/armv8_pmuv3_1/cpus
2-5
# cat /sys/bus/event_source/devices/arm_spe_0/cpumask
0-1,6-11
# ls /sys/bus/event_source/devices/cs_etm/sinks/
trbe0 trbe1 trbe10 trbe11 trbe2 trbe3 trbe4 trbe5 trbe6 trbe7 trbe8 trbe9
The CPU PMU masks match the MIDR groups: eight A720 CPUs and four A520
CPUs. SPE uses the A720 mask, and TRBE exposes one sink per CPU.
[1] https://lore.kernel.org/linux-arm-kernel/20261102084153.3975282-1-johnny.fan@xxxxxxxxxxx/
Signed-off-by: Leo Yan <leo.yan@xxxxxxx>
---
Johnny.Fan (1):
perf/arm_pmu: Register ACPI SPE and TRBE devices with software nodes
Leo Yan (7):
device property: Add firmware node IRQ affinity callbacks
device property: Add software-node IRQ affinity masks
perf/arm_pmu: Prepare ACPI registration for per-CPU interrupts
perf/arm_pmu: Register ACPI CPU PMUs as platform devices
perf/arm_pmu: Support ACPI devices in the platform probe
perf/arm_pmu: Use ACPI CPU affinity in IRQ handling
ACPI: arm64: Move PMU device registration to drivers/acpi/arm64/
MAINTAINERS | 1 +
arch/arm64/include/asm/acpi.h | 3 +
drivers/acpi/arm64/Kconfig | 4 +
drivers/acpi/arm64/Makefile | 1 +
drivers/acpi/arm64/pmu.c | 393 +++++++++++++++++++++++++++++++++++
drivers/acpi/property.c | 8 +
drivers/base/platform.c | 7 +-
drivers/base/property.c | 15 ++
drivers/base/swnode.c | 53 +++++
drivers/of/property.c | 7 +
drivers/perf/Kconfig | 4 -
drivers/perf/Makefile | 1 -
drivers/perf/arm_pmu.c | 3 +-
drivers/perf/arm_pmu_acpi.c | 438 ----------------------------------------
drivers/perf/arm_pmu_platform.c | 62 +++++-
drivers/perf/arm_pmuv3.c | 5 +-
include/linux/cpuhotplug.h | 1 -
include/linux/fwnode.h | 5 +
include/linux/perf/arm_pmu.h | 12 +-
include/linux/property.h | 6 +
20 files changed, 552 insertions(+), 477 deletions(-)
---
base-commit: aebb7274476403040d582c61478df8f4a7bf9cd3
change-id: 20261109-acpi_arm_pmu_registration_hmp-6c595cf0d8de
Best regards,
--
Leo Yan <leo.yan@xxxxxxx>