[PATCH v2 00/16] Add initial support for Qualcomm Halliday and Samsung Galaxy XR

From: Stanislav Aleksandrov

Date: Mon Nov 16 2026 - 16:26:38 EST


This series introduces initial Devicetree support for the Qualcomm Halliday
(SXR2250P / Snapdragon XR2+ Gen 2) and the Samsung Galaxy XR headset
(board compatible "samsung,xrvst2").

With this DT and the driver series, the headset boots to an initramfs
with a shell over USB NCM.

UFS, cpufreq and the thermal zones work too. PCIe with Wi-Fi and more
will follow.

Dependencies:
- The dts patches need v2 of the Halliday TLMM, clock, interconnect and
cpufreq series:
https://lore.kernel.org/r/20261116-halliday-tlmm-v2-0-b4dd502ca142@xxxxxxxxx
https://lore.kernel.org/r/20261116-halliday-clk-v2-0-28208928da36@xxxxxxxxx
https://lore.kernel.org/r/20261116-halliday-icc-v2-0-6df8fc0e0620@xxxxxxxxx
https://lore.kernel.org/r/20261116-halliday-cpufreq-v2-0-e518cc055457@xxxxxxxxx

This work was made together with Claude, ChatGPT and Gemini.
Reviewed and tested on my Galaxy XR.

Signed-off-by: Stanislav Aleksandrov <lightofmysoul@xxxxxxxxx>
---
Changes in v2:
- Order the patches by subsystem, with the SoC ones last (Krzysztof)
- Squash the "halliday" codename patch into the board binding
(Krzysztof)
- Add the SoC ID patches, which were a separate series in v1
(Krzysztof):
https://patch.msgid.link/20261108-sxr2250p-socinfo-v1-0-06244862f5c6@xxxxxxxxx
- Move the OSM L3 binding to the interconnect series (Krzysztof) and
the cpufreq-hw binding to the cpufreq series, so that each subsystem
gets its patches in one series
- dtsi: Keep the Linaro copyright of sm8550.dtsi, which the layout
comes from (Krzysztof)
- dtsi: Drop the empty chosen node (Krzysztof)
- dtsi: Sort the thermal trips by temperature (Krzysztof)
- dtsi: Put idle-states before domain-idle-states and
arm,psci-suspend-param before the latencies, like glymur.dtsi
(Konrad)
- dtsi: Use 0x0 for zeroes in reg, ranges, dma-ranges and
redistributor-stride (Konrad)
- dtsi: Break the reg-names, interrupt-names, clocks and clock-names
lists into one entry per line (Konrad)
- Cc Ulf Hansson for the rpmpd binding
- Link to v1: https://patch.msgid.link/20261109-halliday-dts-v1-0-289114ab8197@xxxxxxxxx

---
Stanislav Aleksandrov (16):
dt-bindings: interrupt-controller: qcom,pdc: Document Halliday PDC
dt-bindings: power: qcom,rpmpd: document the Halliday RPMh Power Domains
dt-bindings: mfd: qcom,tcsr: Add Halliday TCSR
dt-bindings: arm-smmu: Add Halliday SMMU
dt-bindings: usb: qcom,snps-dwc3: Add Halliday
dt-bindings: phy: qcom,usb-snps-femto-v2: Add Halliday HS PHY
dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: Add Halliday
dt-bindings: ufs: qcom,sc7180-ufshc: Add Halliday UFS
dt-bindings: crypto: qcom,inline-crypto-engine: Add Halliday
dt-bindings: thermal: qcom-tsens: Document the Halliday Temperature Sensor
dt-bindings: firmware: qcom,scm: Document Halliday SCM
dt-bindings: arm: qcom: Add Samsung Galaxy XR
dt-bindings: arm: qcom,ids: Add SoC ID for SXR2250P
soc: qcom: socinfo: Add SXR2250P SoC ID
arm64: dts: qcom: Add initial Halliday dtsi
arm64: dts: qcom: Add Samsung Galaxy XR

.../devicetree/bindings/arm/qcom-soc.yaml | 4 +-
Documentation/devicetree/bindings/arm/qcom.yaml | 5 +
.../bindings/crypto/qcom,inline-crypto-engine.yaml | 1 +
.../devicetree/bindings/firmware/qcom,scm.yaml | 2 +
.../bindings/interrupt-controller/qcom,pdc.yaml | 1 +
.../devicetree/bindings/iommu/arm,smmu.yaml | 2 +
.../devicetree/bindings/mfd/qcom,tcsr.yaml | 1 +
.../bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml | 4 +
.../bindings/phy/qcom,usb-snps-femto-v2.yaml | 1 +
.../devicetree/bindings/power/qcom,rpmpd.yaml | 4 +
.../devicetree/bindings/thermal/qcom-tsens.yaml | 1 +
.../devicetree/bindings/ufs/qcom,sc7180-ufshc.yaml | 2 +
.../devicetree/bindings/usb/qcom,snps-dwc3.yaml | 3 +
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../boot/dts/qcom/halliday-samsung-xrvst2.dts | 218 +++
arch/arm64/boot/dts/qcom/halliday.dtsi | 1871 ++++++++++++++++++++
drivers/soc/qcom/socinfo.c | 1 +
include/dt-bindings/arm/qcom,ids.h | 1 +
18 files changed, 2121 insertions(+), 2 deletions(-)
---
base-commit: eac8f0411262ea7d156407da4baf260291cbfe32
change-id: 20261108-halliday-dts-e6ed3a2b5cd0
prerequisite-change-id: 20261108-halliday-tlmm-f250374110e0:v2
prerequisite-patch-id: 0f6c7c801393ba2d1ed5fc82a65be6b05f0f6cbe
prerequisite-patch-id: 36f2dcc3de10d5ccba9eee25b73736189559162a
prerequisite-change-id: 20261108-halliday-clk-362190f4f5dd:v2
prerequisite-patch-id: 765d40b7543dba6580852939a5c3d177f12d0a1e
prerequisite-patch-id: f12c958fceb125bcefd8dc9de139f30a371f85a4
prerequisite-patch-id: a6559b14fa1badec8e7752940362d68306523557
prerequisite-patch-id: ef47e531053032f65d3d600e2213c8a78e50f20b
prerequisite-patch-id: c4b2cbea76a00aeb699d706e09a899aa18e510d9
prerequisite-change-id: 20261108-halliday-icc-65a5442be859:v2
prerequisite-patch-id: 94cd5dee75e96876c6a42852cf6d1b52df1c7ace
prerequisite-patch-id: 9ad58176d603ffd84e7f1239c3b646cede4c8a3f
prerequisite-patch-id: a5df517be2541ab439d324dfe23ceb4c71a0e655
prerequisite-change-id: 20261108-halliday-cpufreq-1e9c3581e2b4:v2
prerequisite-patch-id: 95b1ae328d8049ecbe450b0f18df15465619f2af
prerequisite-patch-id: f67013633e74af33f78e3ee4d9de38bb2842fe87

Best regards,
--
Stanislav Aleksandrov <lightofmysoul@xxxxxxxxx>